WinErrs

WinErrs

offline
  • den78  Male
  • Super građanin
  • Pridružio: 07 Jul 2005
  • Poruke: 1227
  • Gde živiš: Moe's Tavern

WinErrs 1.0


Did you ever get an 'Illegal
Operation' or 'Page Fault' error message and
wonder what it meant? WinErrs is a database
of 1.554 Windows error codes and their
definitions. These codes are extracted
directly from Microsoft Windows and are
their descriptions. With over 1,500 error
codes they certainly seemed prepared for the
worst.

licence: FREE

http://camtech2000.net/Programs/wnerrs10.zip



Registruj se da bi učestvovao u diskusiji. Registrovanim korisnicima se NE prikazuju reklame unutar poruka.
offline
  • Pridružio: 10 Okt 2005
  • Poruke: 13526
  • Gde živiš: Beograd

Evo rezimea tih gresaka:
Win Errors:
0 The operation completed successfully.
1 Incorrect function.
2 The system cannot find the file specified.
3 The system cannot find the path specified.
4 The system cannot open the file.
5 Access is denied.
6 The handle is invalid.
7 The storage control blocks were destroyed.
8 Not enough storage is available to process this command.
9 The storage control block address is invalid.
10 The environment is incorrect.
11 An attempt was made to load a program with an incorrect format.
12 The access code is invalid.
13 The data is invalid.
14 Not enough storage is available to complete this operation.
15 The system cannot find the drive specified.
16 The directory cannot be removed.
17 The system cannot move the file to a different disk drive.
18 There are no more files.
19 The media is write protected.
20 The system cannot find the device specified.
21 The device is not ready.
22 The device does not recognize the command.
23 Data error (cyclic redundancy check)
24 The program issued a command but the command length is incorrect.
25 The drive cannot locate a specific area or track on the disk.
26 The specified disk or diskette cannot be accessed.
27 The drive cannot find the sector requested.
28 The printer is out of paper.
29 The system cannot write to the specified device.
30 The system cannot read from the specified device.
31 A device attached to the system is not functioning.
32 The process cannot access the file because it is being used by another process.
33 The process cannot access the file because another process has locked a portion of the file.
34 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
36 Too many files opened for sharing.
38 Reached end of file.
39 The disk is full.
50 The network request is not supported.
51 The remote computer is not available.
52 A duplicate name exists on the network.
53 The network path was not found.
54 The network is busy.
55 The specified network resource or device is no longer available.
56 The network BIOS command limit has been reached.
57 A network adapter hardware error occurred.
58 The specified server cannot perform the requested operation.
59 An unexpected network error occurred.
60 The remote adapter is not compatible.
61 The printer queue is full.
62 Space to store the file waiting to be printed is not available on the server.
63 Your file waiting to be printed was deleted.
64 The specified network name is no longer available.
65 Network access is denied.
66 The network resource type is not correct.
67 The network name cannot be found.
68 The name limit for the local computer network adapter card was exceeded.
69 The network BIOS session limit was exceeded.
70 The remote server has been paused or is in the process of being started.
71 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
72 The specified printer or disk device has been paused.
80 The file exists.
82 The directory or file cannot be created.
83 Fail on INT 24
84 Storage to process this request is not available.
85 The local device name is already in use.
86 The specified network password is not correct.
87 The parameter is incorrect.
88 A write fault occurred on the network.
89 The system cannot start another process at this time.
100 Cannot create another system semaphore.
101 The exclusive semaphore is owned by another process.
102 The semaphore is set and cannot be closed.
103 The semaphore cannot be set again.
104 Cannot request exclusive semaphores at interrupt time.
105 The previous ownership of this semaphore has ended.
106 Insert the diskette for drive %1.
107 Program stopped because alternate diskette was not inserted.
108 The disk is in use or locked by another process.
109 The pipe has been ended.
110 The system cannot open the device or file specified.
111 The file name is too long.
112 There is not enough space on the disk.
113 No more internal file identifiers available.
114 The target internal file identifier is incorrect.
117 The IOCTL call made by the application program is not correct.
118 The verify-on-write switch parameter value is not correct.
119 The system does not support the command requested.
120 This function is only valid in Win32 mode.
121 The semaphore timeout period has expired.
122 The data area passed to a system call is too small.
123 The filename, directory name, or volume label syntax is incorrect.
124 The system call level is not correct.
125 The disk has no volume label.
126 The specified module could not be found.
127 The specified procedure could not be found.
128 There are no child processes to wait for.
129 The %1 application cannot be run in Win32 mode.
130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
131 An attempt was made to move the file pointer before the beginning of the file.
132 The file pointer cannot be set on the specified device or file.
133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
136 The system tried to delete the JOIN of a drive that is not joined.
137 The system tried to delete the substitution of a drive that is not substituted.
138 The system tried to join a drive to a directory on a joined drive.
139 The system tried to substitute a drive to a directory on a substituted drive.
140 The system tried to join a drive to a directory on a substituted drive.
141 The system tried to SUBST a drive to a directory on a joined drive.
142 The system cannot perform a JOIN or SUBST at this time.
143 The system cannot join or substitute a drive to or for a directory on the same drive.
144 The directory is not a subdirectory of the root directory.
145 The directory is not empty.
146 The path specified is being used in a substitute.
147 Not enough resources are available to process this command.
148 The path specified cannot be used at this time.
149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
150 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
151 The number of specified semaphore events for DosMuxSemWait is not correct.
152 DosMuxSemWait did not execute; too many semaphores are already set.
153 The DosMuxSemWait list is not correct.
154 The volume label you entered exceeds the label character limit of the target file system.
155 Cannot create another thread.
156 The recipient process has refused the signal.
157 The segment is already discarded and cannot be locked.
158 The segment is already unlocked.
159 The address for the thread ID is not correct.
160 The argument string passed to DosExecPgm is not correct.
161 The specified path is invalid.
162 A signal is already pending.
164 No more threads can be created in the system.
167 Unable to lock a region of a file.
170 The requested resource is in use.
173 A lock request was not outstanding for the supplied cancel region.
174 The file system does not support atomic changes to the lock type.
180 The system detected a segment number that was not correct.
182 The operating system cannot run %1.
183 Cannot create a file when that file already exists.
186 The flag passed is not correct.
187 The specified system semaphore name was not found.
188 The operating system cannot run %1.
189 The operating system cannot run %1.
190 The operating system cannot run %1.
191 Cannot run %1 in Win32 mode.
192 The operating system cannot run %1.
193 %1 is not a valid Win32 application.
194 The operating system cannot run %1.
195 The operating system cannot run %1.
196 The operating system cannot run this application program.
197 The operating system is not presently configured to run this application.
198 The operating system cannot run %1.
199 The operating system cannot run this application program.
200 The code segment cannot be greater than or equal to 64KB.
201 The operating system cannot run %1.
202 The operating system cannot run %1.
203 The system could not find the environment option that was entered.
205 No process in the command subtree has a signal handler.
206 The filename or extension is too long.
207 The ring 2 stack is in use.
208 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
209 The signal being posted is not correct.
210 The signal handler cannot be set.
212 The segment is locked and cannot be reallocated.
214 Too many dynamic link modules are attached to this program or dynamic link module.
215 Can't nest calls to LoadModule.
230 The pipe state is invalid.
231 All pipe instances are busy.
232 The pipe is being closed.
233 No process is on the other end of the pipe.
234 More data is available.
240 The session was cancelled.
254 The specified extended attribute name was invalid.
255 The extended attributes are inconsistent.
259 No more data is available.
266 The Copy API cannot be used.
267 The directory name is invalid.
275 The extended attributes did not fit in the buffer.
276 The extended attribute file on the mounted file system is corrupt.
277 The extended attribute table file is full.
278 The specified extended attribute handle is invalid.
282 The mounted file system does not support extended attributes.
288 Attempt to release mutex not owned by caller.
298 Too many posts were made to a semaphore.
299 Only part of a Read/WriteProcessMemory request was completed.
317 The system cannot find message for message number 0x%1 in message file for %2.
487 Attempt to access invalid address.
534 Arithmetic result exceeded 32 bits.
535 There is a process on other end of the pipe.
536 Waiting for a process to open the other end of the pipe.
994 Access to the extended attribute was denied.
995 The I/O operation has been aborted because of either a thread exit or an application request.
996 Overlapped I/O event is not in a signalled state.
997 Overlapped I/O operation is in progress.
998 Invalid access to memory location.
999 Error performing inpage operation.
1001 Recursion too deep, stack overflowed.
1002 The window cannot act on the sent message.
1003 Cannot complete this function.
1004 Invalid flags.
1005 The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.
1006 The volume for a file has been externally altered such that the opened file is no longer valid.
1007 The requested operation cannot be performed in full-screen mode.
1008 An attempt was made to reference a token that does not exist.
1009 The configuration registry database is corrupt.
1010 The configuration registry key is invalid.
1011 The configuration registry key could not be opened.
1012 The configuration registry key could not be read.
1013 The configuration registry key could not be written.
1014 One of the files in the Registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
1015 The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt.
1016 An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
1017 The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format.
1018 Illegal operation attempted on a Registry key which has been marked for deletion.
1019 System could not allocate the required space in a Registry log.
1020 Cannot create a symbolic link in a Registry key that already has subkeys or values.
1021 Cannot create a stable subkey under a volatile parent key.
1022 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
1051 A stop control has been sent to a service which other running services are dependent on.
1052 The requested control is not valid for this service
1053 The service did not respond to the start or control request in a timely fashion.
1054 A thread could not be created for the service.
1055 The service database is locked.
1056 An instance of the service is already running.
1057 The account name is invalid or does not exist.
1058 The specified service is disabled and cannot be started.
1059 Circular service dependency was specified.
1060 The specified service does not exist as an installed service.
1061 The service cannot accept control messages at this time.
1062 The service has not been started.
1063 The service process could not connect to the service controller.
1064 An exception occurred in the service when handling the control request.
1065 The database specified does not exist.
1066 The service has returned a service-specific error code.
1067 The process terminated unexpectedly.
1068 The dependency service or group failed to start.
1069 The service did not start due to a logon failure.
1070 After starting, the service hung in a start-pending state.
1071 The specified service database lock is invalid.
1072 The specified service has been marked for deletion.
1073 The specified service already exists.
1074 The system is currently running with the last-known-good configuration.
1075 The dependency service does not exist or has been marked for deletion.
1076 The current boot has already been accepted for use as the last-known-good control set.
1077 No attempts to start the service have been made since the last boot.
1078 The name is already in use as either a service name or a service display name.
1100 The physical end of the tape has been reached.
1101 A tape access reached a filemark.
1102 Beginning of tape or partition was encountered.
1103 A tape access reached the end of a set of files.
1104 No more data is on the tape.
1105 Tape could not be partitioned.
1106 When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
1107 Tape partition information could not be found when loading a tape.
1108 Unable to lock the media eject mechanism.
1109 Unable to unload the media.
1110 Media in drive may have changed.
1111 The I/O bus was reset.
1112 No media in drive.
1113 No mapping for the Unicode character exists in the target multi-byte code page.
1114 A dynamic link library (DLL) initialization routine failed.
1115 A system shutdown is in progress.
1116 Unable to abort the system shutdown because no shutdown was in progress.
1117 The request could not be performed because of an I/O device error.
1118 No serial device was successfully initialized. The serial driver will unload.
1119 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
1120 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121 A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122 No ID address mark was found on the floppy disk.
1123 Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
1124 The floppy disk controller reported an error that is not recognized by the floppy disk driver.
1125 The floppy disk controller returned inconsistent results in its registers.
1126 While accessing the hard disk, a recalibrate operation failed, even after retries.
1127 While accessing the hard disk, a disk operation failed even after retries.
1128 While accessing the hard disk, a disk controller reset was needed, but even that failed.
1129 Physical end of tape encountered.
1130 Not enough server storage is available to process this command.
1131 A potential deadlock condition has been detected.
1132 The base address or the file offset specified does not have the proper alignment.
1140 An attempt to change the system power state was vetoed by another application or driver.
1141 The system BIOS failed an attempt to change the system power state.
1150 The specified program requires a newer version of Windows.
1151 The specified program is not a Windows or MS-DOS program.
1152 Cannot start more than one instance of the specified program.
1153 The specified program was written for an older version of Windows.
1154 One of the library files needed to run this application is damaged.
1155 No application is associated with the specified file for this operation.
1156 An error occurred in sending the command to the application.
1157 One of the library files needed to run this application cannot be found.
1200 The specified device name is invalid.
1201 The device is not currently connected but it is a remembered connection.
1202 An attempt was made to remember a device that had previously been remembered.
1203 No network provider accepted the given network path.
1204 The specified network provider name is invalid.
1205 Unable to open the network connection profile.
1206 The network connection profile is corrupt.
1207 Cannot enumerate a non-container.
1208 An extended error has occurred.
1209 The format of the specified group name is invalid.
1210 The format of the specified computer name is invalid.
1211 The format of the specified event name is invalid.
1212 The format of the specified domain name is invalid.
1213 The format of the specified service name is invalid.
1214 The format of the specified network name is invalid.
1215 The format of the specified share name is invalid.
1216 The format of the specified password is invalid.
1217 The format of the specified message name is invalid.
1218 The format of the specified message destination is invalid.
1219 The credentials supplied conflict with an existing set of credentials.
1220 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
1221 The workgroup or domain name is already in use by another computer on the network.
1222 The network is not present or not started.
1223 The operation was cancelled by the user.
1224 The requested operation cannot be performed on a file with a user mapped section open.
1225 The remote system refused the network connection.
1226 The network connection was gracefully closed.
1227 The network transport endpoint already has an address associated with it.
1228 An address has not yet been associated with the network endpoint.
1229 An operation was attempted on a non-existent network connection.
1230 An invalid operation was attempted on an active network connection.
1231 The remote network is not reachable by the transport.
1232 The remote system is not reachable by the transport.
1233 The remote system does not support the transport protocol.
1234 No service is operating at the destination network endpoint on the remote system.
1235 The request was aborted.
1236 The network connection was aborted by the local system.
1237 The operation could not be completed. A retry should be performed.
1238 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
1239 Attempting to login during an unauthorized time of day for this account.
1240 The account is not authorized to login from this station.
1241 The network address could not be used for the operation requested.
1242 The service is already registered.
1243 The specified service does not exist.
1244 The operation being requested was not performed because the user has not been authenticated.
1245 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
1246 Return that wants caller to continue with work in progress.
1247 An attempt was made to perform an initialization operation when initialization has already been completed.
1248 No more local devices.
1300 Not all privileges referenced are assigned to the caller.
1301 Some mapping between account names and security IDs was not done.
1302 No system quota limits are specifically set for this account.
1303 No encryption key is available. A well-known encryption key was returned.
1304 The NT password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
1305 The revision level is unknown.
1306 Indicates two revision levels are incompatible.
1307 This security ID may not be assigned as the owner of this object.
1308 This security ID may not be assigned as the primary group of an object.
1309 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
1310 The group may not be disabled.
1311 There are currently no logon servers available to service the logon request.
1312 A specified logon session does not exist. It may already have been terminated.
1313 A specified privilege does not exist.
1314 A required privilege is not held by the client.
1315 The name provided is not a properly formed account name.
1316 The specified user already exists.
1317 The specified user does not exist.
1318 The specified group already exists.
1319 The specified group does not exist.
1320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
1321 The specified user account is not a member of the specified group account.
1322 The last remaining administration account cannot be disabled or deleted.
1323 Unable to update the password. The value provided as the current password is incorrect.
1324 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
1325 Unable to update the password because a password update rule has been violated.
1326 Logon failure: unknown user name or bad password.
1327 Logon failure: user account restriction.
1328 Logon failure: account logon time restriction violation.
1329 Logon failure: user not allowed to log on to this computer.
1330 Logon failure: the specified account password has expired.
1331 Logon failure: account currently disabled.
1332 No mapping between account names and security IDs was done.
1333 Too many local user identifiers (LUIDs) were requested at one time.
1334 No more local user identifiers (LUIDs) are available.
1335 The subauthority part of a security ID is invalid for this particular use.
1336 The access control list (ACL) structure is invalid.
1337 The security ID structure is invalid.
1338 The security descriptor structure is invalid.
1340 The inherited access control list (ACL) or access control entry (ACE) could not be built.
1341 The server is currently disabled.
1342 The server is currently enabled.
1343 The value provided was an invalid value for an identifier authority.
1344 No more memory is available for security information updates.
1345 The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
1346 Either a required impersonation level was not provided, or the provided impersonation level is invalid.
1347 Cannot open an anonymous level security token.
1348 The validation information class requested was invalid.
1349 The type of the token is inappropriate for its attempted use.
1350 Unable to perform a security operation on an object which has no associated security.
1351 Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.
1352 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
1353 The domain was in the wrong state to perform the security operation.
1354 This operation is only allowed for the Primary Domain Controller of the domain.
1355 The specified domain did not exist.
1356 The specified domain already exists.
1357 An attempt was made to exceed the limit on the number of domains per server.
1358 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
1359 The security account database contains an internal inconsistency.
1360 Generic access types were contained in an access mask which should already be mapped to non-generic types.
1361 A security descriptor is not in the right format (absolute or self-relative).
1362 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
1363 Cannot start a new logon session with an ID that is already in use.
1364 A specified authentication package is unknown.
1365 The logon session is not in a state that is consistent with the requested operation.
1366 The logon session ID is already in use.
1367 A logon request contained an invalid logon type value.
1368 Unable to impersonate via a named pipe until data has been read from that pipe.
1369 The transaction state of a Registry subtree is incompatible with the requested operation.
1370 An internal security database corruption has been encountered.
1371 Cannot perform this operation on built-in accounts.
1372 Cannot perform this operation on this built-in special group.
1373 Cannot perform this operation on this built-in special user.
1374 The user cannot be removed from a group because the group is currently the user's primary group.
1375 The token is already in use as a primary token.
1376 The specified local group does not exist.
1377 The specified account name is not a member of the local group.
1378 The specified account name is already a member of the local group.
1379 The specified local group already exists.
1380 Logon failure: the user has not been granted the requested logon type at this computer.
1381 The maximum number of secrets that may be stored in a single system has been exceeded.
1382 The length of a secret exceeds the maximum length allowed.
1383 The local security authority database contains an internal inconsistency.
1384 During a logon attempt, the user's security context accumulated too many security IDs.
1385 Logon failure: the user has not been granted the requested logon type at this computer.
1386 A cross-encrypted password is necessary to change a user password.
1387 A new member could not be added to a local group because the member does not exist.
1388 A new member could not be added to a local group because the member has the wrong account type.
1389 Too many security IDs have been specified.
1390 A cross-encrypted password is necessary to change this user password.
1391 Indicates an ACL contains no inheritable components
1392 The file or directory is corrupt and non-readable.
1393 The disk structure is corrupt and non-readable.
1394 There is no user session key for the specified logon session.
1395 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
1400 Invalid window handle.
1401 Invalid menu handle.
1402 Invalid cursor handle.
1403 Invalid accelerator table handle.
1404 Invalid hook handle.
1405 Invalid handle to a multiple-window position structure.
1406 Cannot create a top-level child window.
1407 Cannot find window class.
1408 Invalid window, belongs to other thread.
1409 Hot key is already registered.
1410 Class already exists.
1411 Class does not exist.
1412 Class still has open windows.
1413 Invalid index.
1414 Invalid icon handle.
1415 Using private DIALOG window words.
1416 The listbox identifier was not found.
1417 No wildcards were found.
1418 Thread does not have a clipboard open.
1419 Hot key is not registered.
1420 The window is not a valid dialog window.
1421 Control ID not found.
1422 Invalid message for a combo box because it does not have an edit control.
1423 The window is not a combo box.
1424 Height must be less than 256.
1425 Invalid device context (DC) handle.
1426 Invalid hook procedure type.
1427 Invalid hook procedure.
1428 Cannot set non-local hook without a module handle.
1429 This hook procedure can only be set globally.
1430 The journal hook procedure is already installed.
1431 The hook procedure is not installed.
1432 Invalid message for single-selection listbox.
1433 LB_SETCOUNT sent to non-lazy listbox.
1434 This list box does not support tab stops.
1435 Cannot destroy object created by another thread.
1436 Child windows cannot have menus.
1437 The window does not have a system menu.
1438 Invalid message box style.
1439 Invalid system-wide (SPI_*) parameter.
1440 Screen already locked.
1441 All handles to windows in a multiple-window position structure must have the same parent.
1442 The window is not a child window.
1443 Invalid GW_* command.
1444 Invalid thread identifier.
1445 Cannot process a message from a window that is not a multiple document interface (MDI) window.
1446 Popup menu already active.
1447 The window does not have scroll bars.
1448 Scroll bar range cannot be greater than 0x7FFF.
1449 Cannot show or remove the window in the way specified.
1450 Insufficient system resources exist to complete the requested service.
1451 Insufficient system resources exist to complete the requested service.
1452 Insufficient system resources exist to complete the requested service.
1453 Insufficient quota to complete the requested service.
1454 Insufficient quota to complete the requested service.
1455 The paging file is too small for this operation to complete.
1456 A menu item was not found.
1500 The event log file is corrupt.
1501 No event log file could be opened, so the event logging service did not start.
1502 The event log file is full.
1503 The event log file has changed between reads.
1700 The string binding is invalid.
1701 The binding handle is not the correct type.
1702 The binding handle is invalid.
1703 The RPC protocol sequence is not supported.
1704 The RPC protocol sequence is invalid.
1705 The string universal unique identifier (UUID) is invalid.
1706 The endpoint format is invalid.
1707 The network address is invalid.
1708 No endpoint was found.
1709 The timeout value is invalid.
1710 The object universal unique identifier (UUID) was not found.
1711 The object universal unique identifier (UUID) has already been registered.
1712 The type universal unique identifier (UUID) has already been registered.
1713 The RPC server is already listening.
1714 No protocol sequences have been registered.
1715 The RPC server is not listening.
1716 The manager type is unknown.
1717 The interface is unknown.
1718 There are no bindings.
1719 There are no protocol sequences.
1720 The endpoint cannot be created.
1721 Not enough resources are available to complete this operation.
1722 The RPC server is unavailable.
1723 The RPC server is too busy to complete this operation.
1724 The network options are invalid.
1725 There is not a remote procedure call active in this thread.
1726 The remote procedure call failed.
1727 The remote procedure call failed and did not execute.
1728 A remote procedure call (RPC) protocol error occurred.
1730 The transfer syntax is not supported by the RPC server.
1732 The universal unique identifier (UUID) type is not supported.
1733 The tag is invalid.
1734 The array bounds are invalid.
1735 The binding does not contain an entry name.
1736 The name syntax is invalid.
1737 The name syntax is not supported.
1739 No network address is available to use to construct a universal unique identifier (UUID).
1740 The endpoint is a duplicate.
1741 The authentication type is unknown.
1742 The maximum number of calls is too small.
1743 The string is too long.
1744 The RPC protocol sequence was not found.
1745 The procedure number is out of range.
1746 The binding does not contain any authentication information.
1747 The authentication service is unknown.
1748 The authentication level is unknown.
1749 The security context is invalid.
1750 The authorization service is unknown.
1751 The entry is invalid.
1752 The server endpoint cannot perform the operation.
1753 There are no more endpoints available from the endpoint mapper.
1754 No interfaces have been exported.
1755 The entry name is incomplete.
1756 The version option is invalid.
1757 There are no more members.
1758 There is nothing to unexport.
1759 The interface was not found.
1760 The entry already exists.
1761 The entry is not found.
1762 The name service is unavailable.
1763 The network address family is invalid.
1764 The requested operation is not supported.
1765 No security context is available to allow impersonation.
1766 An internal error occurred in a remote procedure call (RPC).
1767 The RPC server attempted an integer division by zero.
1768 An addressing error occurred in the RPC server.
1769 A floating-point operation at the RPC server caused a division by zero.
1770 A floating-point underflow occurred at the RPC server.
1771 A floating-point overflow occurred at the RPC server.
1772 The list of RPC servers available for the binding of auto handles has been exhausted.
1773 Unable to open the character translation table file.
1774 The file containing the character translation table has fewer than 512 bytes.
1775 A null context handle was passed from the client to the host during a remote procedure call.
1777 The context handle changed during a remote procedure call.
1778 The binding handles passed to a remote procedure call do not match.
1779 The stub is unable to get the remote procedure call handle.
1780 A null reference pointer was passed to the stub.
1781 The enumeration value is out of range.
1782 The byte count is too small.
1783 The stub received bad data.
1784 The supplied user buffer is not valid for the requested operation.
1785 The disk media is not recognized. It may not be formatted.
1786 The workstation does not have a trust secret.
1787 The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.
1788 The trust relationship between the primary domain and the trusted domain failed.
1789 The trust relationship between this workstation and the primary domain failed.
1790 The network logon failed.
1791 A remote procedure call is already in progress for this thread.
1792 An attempt was made to logon, but the network logon service was not started.
1793 The user's account has expired.
1794 The redirector is in use and cannot be unloaded.
1795 The specified printer driver is already installed.
1796 The specified port is unknown.
1797 The printer driver is unknown.
1798 The print processor is unknown.
1799 The specified separator file is invalid.
1800 The specified priority is invalid.
1801 The printer name is invalid.
1802 The printer already exists.
1803 The printer command is invalid.
1804 The specified datatype is invalid.
1805 The Environment specified is invalid.
1806 There are no more bindings.
1807 The account used is an interdomain trust account. Use your global user account or local user account to access this server.
1808 The account used is a Computer Account. Use your global user account or local user account to access this server.
1809 The account used is an server trust account. Use your global user account or local user account to access this server.
1810 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
1811 The server is in use and cannot be unloaded.
1812 The specified image file did not contain a resource section.
1813 The specified resource type can not be found in the image file.
1814 The specified resource name can not be found in the image file.
1815 The specified resource language ID cannot be found in the image file.
1816 Not enough quota is available to process this command.
1817 No interfaces have been registered.
1818 The server was altered while processing this call.
1819 The binding handle does not contain all required information.
1820 Communications failure.
1821 The requested authentication level is not supported.
1822 No principal name registered.
1823 The error specified is not a valid Windows RPC error code.
1824 A UUID that is valid only on this computer has been allocated.
1825 A security package specific error occurred.
1826 Thread is not cancelled.
1827 Invalid operation on the encoding/decoding handle.
1828 Incompatible version of the serializing package.
1829 Incompatible version of the RPC stub.
1898 The group member was not found.
1899 The endpoint mapper database could not be created.
1900 The object universal unique identifier (UUID) is the nil UUID.
1901 The specified time is invalid.
1902 The specified Form name is invalid.
1903 The specified Form size is invalid
1904 The specified Printer handle is already being waited on
1905 The specified Printer has been deleted
1906 The state of the Printer is invalid
1907 The user must change his password before he logs on the first time.
1908 Could not find the domain controller for this domain.
1909 The referenced account is currently locked out and may not be logged on to.
2000 The pixel format is invalid.
2001 The specified driver is invalid.
2002 The window style or class attribute is invalid for this operation.
2003 The requested metafile operation is not supported.
2004 The requested transformation operation is not supported.
2005 The requested clipping operation is not supported.
2202 The specified username is invalid.
2250 This network connection does not exist.
2401 This network connection has files open or requests pending.
2402 Active connections still exist.
2404 The device is in use by an active process and cannot be disconnected.
3000 The specified print monitor is unknown.
3001 The specified printer driver is currently in use.
3002 The spool file was not found.
3003 A StartDocPrinter call was not issued.
3004 An AddJob call was not issued.
3005 The specified print processor has already been installed.
3006 The specified print monitor has already been installed.
4000 WINS encountered an error while processing the command.
4001 The local WINS can not be deleted.
4002 The importation from the file failed.
4003 The backup Failed. Was a full backup done before ?
4004 The backup Failed. Check the directory that you are backing the database to.
4005 The name does not exist in the WINS database.
4006 Replication with a non-configured partner is not allowed.
6118 The list of servers for this workgroup is not currently available


OLE Errors:
&H80000001 Not implemented
&H80000002 Ran out of memory
&H80000003 One or more arguments are invalid
&H80000004 No such interface supported
&H80000005 Invalid pointer
&H80000006 Invalid handle
&H80000007 Operation aborted
&H80000008 Unspecified error
&H80000009 General access denied error
&H80004001 Not implemented
&H80004002 No such interface supported
&H80004003 Invalid pointer
&H80004004 Operation aborted
&H80004005 Unspecified error
&H80004006 Thread local storage failure
&H80004007 Get shared memory allocator failure
&H80004008 Get memory allocator failure
&H80004009 Unable to initialize class cache
&H8000400A Unable to initialize RPC services
&H8000400B Cannot set thread local storage channel control
&H8000400C Could not allocate thread local storage channel control
&H8000400D The user supplied memory allocator is unacceptable
&H8000400E The OLE service mutex already exists
&H8000400F The OLE service file mapping already exists
&H80004010 Unable to map view of file for OLE service
&H80004011 Failure attempting to launch OLE service
&H80004012 There was an attempt to call CoInitialize a second time while single threaded
&H8000FFFF Unexpected failure
&H80010001 Call was rejected by callee.
&H80010002 Call was canceled by the message filter.
&H80010003 The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage.
&H80010004 The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call.
&H80010005 It is illegal to call out while inside message filter.
&H80010006 The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid.
&H80010007 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.
&H80010008 The caller (client) disappeared while the callee (server) was processing a call.
&H80010009 The data packet with the marshalled parameter data is incorrect.
&H8001000A The call was not transmitted properly; the message queue was full and was not emptied after yielding.
&H8001000B The client (caller) cannot marshall the parameter data - low memory, etc.
&H8001000C The client (caller) cannot unmarshall the return data - low memory, etc.
&H8001000D The server (callee) cannot marshall the return data - low memory, etc.
&H8001000E The server (callee) cannot unmarshall the parameter data - low memory, etc.
&H8001000F Received data is invalid; could be server or client data.
&H80010010 A particular parameter is invalid and cannot be (un)marshalled.
&H80010011 There is no second outgoing call on same channel in DDE conversation.
&H80010012 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute.
&H80010100 System call failed.
&H80010101 Could not allocate some required resource (memory, events, ...)
&H80010102 Attempted to make calls on more than one thread in single threaded mode.
&H80010103 The requested interface is not registered on the server object.
&H80010104 RPC could not call the server or could not return the results of calling the server.
&H80010105 The server threw an exception.
&H80010106 Cannot change thread mode after it is set.
&H80010107 The method called does not exist on the server.
&H80010108 The object invoked has disconnected from its clients.
&H80010109 The object invoked chose not to process the call now. Try again later.
&H8001010A The message filter indicated that the application is busy.
&H8001010B The message filter rejected the call.
&H8001010C A call control interfaces was called with invalid data.
&H8001010D An outgoing call cannot be made since the application is dispatching an input-synchronous call.
&H8001010E The application called an interface that was marshalled for a different thread.
&H8001010F CoInitialize has not been called on the current thread.
&H8001FFFF An internal error occurred.
&H80020001 Unknown interface.
&H80020003 Member not found.
&H80020004 Parameter not found.
&H80020005 Type mismatch.
&H80020006 Unknown name.
&H80020007 No named arguments.
&H80020008 Bad variable type.
&H80020009 Exception occurred.
&H8002000A Out of present range.
&H8002000B Invalid index.
&H8002000C Unknown language.
&H8002000D Memory is locked.
&H8002000E Invalid number of parameters.
&H8002000F Parameter not optional.
&H80020010 Invalid callee.
&H80020011 Does not support a collection.
&H80028016 Buffer too small.
&H80028018 Old format or invalid type library.
&H80028019 Old format or invalid type library.
&H8002801C Error accessing the OLE registry.
&H8002801D Library not registered.
&H80028027 Bound to unknown type.
&H80028028 Qualified name disallowed.
&H80028029 Invalid forward reference, or reference to uncompiled type.
&H8002802A Type mismatch.
&H8002802B Element not found.
&H8002802C Ambiguous name.
&H8002802D Name already exists in the library.
&H8002802E Unknown LCID.
&H8002802F Function not defined in specified DLL.
&H800288BD Wrong module kind for the operation.
&H800288C5 Size may not exceed 64K.
&H800288C6 Duplicate ID in inheritance hierarchy.
&H800288CF Incorrect inheritance depth in standard OLE hmember.
&H80028CA0 Type mismatch.
&H80028CA1 Invalid number of arguments.
&H80028CA2 I/O Error.
&H80028CA3 Error creating unique tmp file.
&H80029C4A Error loading type library/DLL.
&H80029C83 Inconsistent property functions.
&H80029C84 Circular dependency between types/modules.
&H80030001 Unable to perform requested operation.
&H80030002 %1 could not be found.
&H80030003 The path %1 could not be found.
&H80030004 There are insufficient resources to open another file.
&H80030005 Access Denied.
&H80030006 Attempted an operation on an invalid object.
&H80030008 There is insufficient memory available to complete operation.
&H80030009 Invalid pointer error.
&H80030012 There are no more entries to return.
&H80030013 Disk is write-protected.
&H80030019 An error occurred during a seek operation.
&H8003001D A disk error occurred during a write operation.
&H8003001E A disk error occurred during a read operation.
&H80030020 A share violation has occurred.
&H80030021 A lock violation has occurred.
&H80030050 %1 already exists.
&H80030057 Invalid parameter error.
&H80030070 There is insufficient disk space to complete operation.
&H800300FA An API call exited abnormally.
&H800300FB The file %1 is not a valid compound file.
&H800300FC The name %1 is not valid.
&H800300FD An unexpected error occurred.
&H800300FE That function is not implemented.
&H800300FF Invalid flag error.
&H80030100 Attempted to use an object that is busy.
&H80030101 The storage has been changed since the last commit.
&H80030102 Attempted to use an object that has ceased to exist.
&H80030103 Can't save.
&H80030104 The compound file %1 was produced with an incompatible version of storage.
&H80030105 The compound file %1 was produced with a newer version of storage.
&H80030106 Share.exe or equivalent is required for operation.
&H80030107 Illegal operation called on non-file based storage.
&H80030108 Illegal operation called on object with extant marshallings.
&H80040000 Invalid OLEVERB structure
&H80040001 Invalid advise flags
&H80040002 Can't enumerate any more, because the associated data is missing
&H80040003 This implementation doesn't take advises
&H80040004 There is no connection for this connection ID
&H80040005 Need to run the object to perform this operation
&H80040006 There is no cache to operate on
&H80040007 Uninitialized object
&H80040008 Linked object's source class has changed
&H80040009 Not able to get the moniker of the object
&H8004000A Not able to bind to the source
&H8004000B Object is static; operation not allowed
&H8004000C User cancelled out of save dialog
&H8004000D Invalid rectangle
&H8004000E compobj.dll is too old for the ole2.dll initialized
&H8004000F Invalid window handle
&H80040010 Object is not in any of the inplace active states
&H80040011 Not able to convert object
&H80040012 Not able to perform the operation because object is not given storage yet
&H80040064 Invalid FORMATETC structure
&H80040065 Invalid DVTARGETDEVICE structure
&H80040066 Invalid STDGMEDIUM structure
&H80040067 Invalid STATDATA structure
&H80040068 Invalid lindex
&H80040069 Invalid tymed
&H8004006A Invalid clipboard format
&H8004006B Invalid aspect(s)
&H8004006C tdSize parameter of the DVTARGETDEVICE structure is invalid
&H8004006D Object doesn't support IViewObject interface
&H80040100 Trying to revoke a drop target that has not been registered
&H80040101 This window has already been registered as a drop target
&H80040102 Invalid window handle
&H80040110 Class does not support aggregation (or class object is remote)
&H80040111 ClassFactory cannot supply requested class
&H80040140 Error drawing view
&H80040150 Could not read key from registry
&H80040151 Could not write key to registry
&H80040152 Could not find the key in the registry
&H80040153 Invalid value for registry
&H80040154 Class not registered
&H80040155 Interface not registered
&H80040170 Cache not updated
&H80040180 No verbs for OLE object
&H80040181 Invalid verb for OLE object
&H800401A0 Undo is not available
&H800401A1 Space for tools is not available
&H800401C0 OLESTREAM Get method failed
&H800401C1 OLESTREAM Put method failed
&H800401C2 Contents of the OLESTREAM not in correct format
&H800401C3 There was an error in a Windows GDI call while converting the bitmap to a DIB
&H800401C4 Contents of the IStorage not in correct format
&H800401C5 Contents of IStorage is missing one of the standard streams
&H800401C6 There was an error in a Windows GDI call while converting the DIB to a bitmap.
&H800401D0 OpenClipboard Failed
&H800401D1 EmptyClipboard Failed
&H800401D2 SetClipboard Failed
&H800401D3 Data on clipboard is invalid
&H800401D4 CloseClipboard Failed
&H800401E0 Moniker needs to be connected manually
&H800401E1 Operation exceeded deadline
&H800401E2 Moniker needs to be generic
&H800401E3 Operation unavailable
&H800401E4 Invalid syntax
&H800401E5 No object for moniker
&H800401E6 Bad extension for file
&H800401E7 Intermediate operation failed
&H800401E8 Moniker is not bindable
&H800401E9 Moniker is not bound
&H800401EA Moniker cannot open file
&H800401EB User input required for operation to succeed
&H800401EC Moniker class has no inverse
&H800401ED Moniker does not refer to storage
&H800401EE No common prefix
&H800401EF Moniker could not be enumerated
&H800401F0 CoInitialize has not been called.
&H800401F1 CoInitialize has already been called.
&H800401F2 Class of object cannot be determined
&H800401F3 Invalid class string
&H800401F4 Invalid interface string
&H800401F5 Application not found
&H800401F6 Application cannot be run more than once
&H800401F7 Some error in application program
&H800401F8 DLL for class not found
&H800401F9 Error in the DLL
&H800401FA Wrong OS or OS version for application
&H800401FB Object is not registered
&H800401FC Object is already registered
&H800401FD Object is not connected to server
&H800401FE Application was launched but it didn't register a class factory
&H800401FF Object has been released
&H80070000 The operation completed successfully.
&H80070001 Incorrect function.
&H80070002 The system cannot find the file specified.
&H80070003 The system cannot find the path specified.
&H80070004 The system cannot open the file.
&H80070005 Access is denied.
&H80070006 The handle is invalid.
&H80070007 The storage control blocks were destroyed.
&H80070008 Not enough storage is available to process this command.
&H80070009 The storage control block address is invalid.
&H8007000A The environment is incorrect.
&H8007000B An attempt was made to load a program with an incorrect format.
&H8007000C The access code is invalid.
&H8007000D The data is invalid.
&H8007000E Not enough storage is available to complete this operation.
&H8007000F The system cannot find the drive specified.
&H80070010 The directory cannot be removed.
&H80070011 The system cannot move the file to a different disk drive.
&H80070012 There are no more files.
&H80070013 The media is write protected.
&H80070014 The system cannot find the device specified.
&H80070015 The device is not ready.
&H80070016 The device does not recognize the command.
&H80070017 Data error (cyclic redundancy check)
&H80070018 The program issued a command but the command length is incorrect.
&H80070019 The drive cannot locate a specific area or track on the disk.
&H8007001A The specified disk or diskette cannot be accessed.
&H8007001B The drive cannot find the sector requested.
&H8007001C The printer is out of paper.
&H8007001D The system cannot write to the specified device.
&H8007001E The system cannot read from the specified device.
&H8007001F A device attached to the system is not functioning.
&H80070020 The process cannot access the file because it is being used by another process.
&H80070021 The process cannot access the file because another process has locked a portion of the file.
&H80070022 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
&H80070024 Too many files opened for sharing.
&H80070026 Reached end of file.
&H80070027 The disk is full.
&H80070032 The network request is not supported.
&H80070033 The remote computer is not available.
&H80070034 A duplicate name exists on the network.
&H80070035 The network path was not found.
&H80070036 The network is busy.
&H80070037 The specified network resource or device is no longer available.
&H80070038 The network BIOS command limit has been reached.
&H80070039 A network adapter hardware error occurred.
&H8007003A The specified server cannot perform the requested operation.
&H8007003B An unexpected network error occurred.
&H8007003C The remote adapter is not compatible.
&H8007003D The printer queue is full.
&H8007003E Space to store the file waiting to be printed is not available on the server.
&H8007003F Your file waiting to be printed was deleted.
&H80070040 The specified network name is no longer available.
&H80070041 Network access is denied.
&H80070042 The network resource type is not correct.
&H80070043 The network name cannot be found.
&H80070044 The name limit for the local computer network adapter card was exceeded.
&H80070045 The network BIOS session limit was exceeded.
&H80070046 The remote server has been paused or is in the process of being started.
&H80070047 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
&H80070048 The specified printer or disk device has been paused.
&H80070050 The file exists.
&H80070052 The directory or file cannot be created.
&H80070053 Fail on INT 24
&H80070054 Storage to process this request is not available.
&H80070055 The local device name is already in use.
&H80070056 The specified network password is not correct.
&H80070057 The parameter is incorrect.
&H80070058 A write fault occurred on the network.
&H80070059 The system cannot start another process at this time.
&H80070064 Cannot create another system semaphore.
&H80070065 The exclusive semaphore is owned by another process.
&H80070066 The semaphore is set and cannot be closed.
&H80070067 The semaphore cannot be set again.
&H80070068 Cannot request exclusive semaphores at interrupt time.
&H80070069 The previous ownership of this semaphore has ended.
&H8007006A Insert the diskette for drive %1.
&H8007006B Program stopped because alternate diskette was not inserted.
&H8007006C The disk is in use or locked by another process.
&H8007006D The pipe has been ended.
&H8007006E The system cannot open the device or file specified.
&H8007006F The file name is too long.
&H80070070 There is not enough space on the disk.
&H80070071 No more internal file identifiers available.
&H80070072 The target internal file identifier is incorrect.
&H80070075 The IOCTL call made by the application program is not correct.
&H80070076 The verify-on-write switch parameter value is not correct.
&H80070077 The system does not support the command requested.
&H80070078 This function is only valid in Win32 mode.
&H80070079 The semaphore timeout period has expired.
&H8007007A The data area passed to a system call is too small.
&H8007007B The filename, directory name, or volume label syntax is incorrect.
&H8007007C The system call level is not correct.
&H8007007D The disk has no volume label.
&H8007007E The specified module could not be found.
&H8007007F The specified procedure could not be found.
&H80070080 There are no child processes to wait for.
&H80070081 The %1 application cannot be run in Win32 mode.
&H80070082 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
&H80070083 An attempt was made to move the file pointer before the beginning of the file.
&H80070084 The file pointer cannot be set on the specified device or file.
&H80070085 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
&H80070086 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
&H80070087 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
&H80070088 The system tried to delete the JOIN of a drive that is not joined.
&H80070089 The system tried to delete the substitution of a drive that is not substituted.
&H8007008A The system tried to join a drive to a directory on a joined drive.
&H8007008B The system tried to substitute a drive to a directory on a substituted drive.
&H8007008C The system tried to join a drive to a directory on a substituted drive.
&H8007008D The system tried to SUBST a drive to a directory on a joined drive.
&H8007008E The system cannot perform a JOIN or SUBST at this time.
&H8007008F The system cannot join or substitute a drive to or for a directory on the same drive.
&H80070090 The directory is not a subdirectory of the root directory.
&H80070091 The directory is not empty.
&H80070092 The path specified is being used in a substitute.
&H80070093 Not enough resources are available to process this command.
&H80070094 The path specified cannot be used at this time.
&H80070095 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
&H80070096 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
&H80070097 The number of specified semaphore events for DosMuxSemWait is not correct.
&H80070098 DosMuxSemWait did not execute; too many semaphores are already set.
&H80070099 The DosMuxSemWait list is not correct.
&H8007009A The volume label you entered exceeds the label character limit of the target file system.
&H8007009B Cannot create another thread.
&H8007009C The recipient process has refused the signal.
&H8007009D The segment is already discarded and cannot be locked.
&H8007009E The segment is already unlocked.
&H8007009F The address for the thread ID is not correct.
&H800700A0 The argument string passed to DosExecPgm is not correct.
&H800700A1 The specified path is invalid.
&H800700A2 A signal is already pending.
&H800700A4 No more threads can be created in the system.
&H800700A7 Unable to lock a region of a file.
&H800700AA The requested resource is in use.
&H800700AD A lock request was not outstanding for the supplied cancel region.
&H800700AE The file system does not support atomic changes to the lock type.
&H800700B4 The system detected a segment number that was not correct.
&H800700B6 The operating system cannot run %1.
&H800700B7 Cannot create a file when that file already exists.
&H800700BA The flag passed is not correct.
&H800700BB The specified system semaphore name was not found.
&H800700BC The operating system cannot run %1.
&H800700BD The operating system cannot run %1.
&H800700BE The operating system cannot run %1.
&H800700BF Cannot run %1 in Win32 mode.
&H800700C0 The operating system cannot run %1.
&H800700C1 %1 is not a valid Win32 application.
&H800700C2 The operating system cannot run %1.
&H800700C3 The operating system cannot run %1.
&H800700C4 The operating system cannot run this application program.
&H800700C5 The operating system is not presently configured to run this application.
&H800700C6 The operating system cannot run %1.
&H800700C7 The operating system cannot run this application program.
&H800700C8 The code segment cannot be greater than or equal to 64KB.
&H800700C9 The operating system cannot run %1.
&H800700CA The operating system cannot run %1.
&H800700CB The system could not find the environment option that was entered.
&H800700CD No process in the command subtree has a signal handler.
&H800700CE The filename or extension is too long.
&H800700CF The ring 2 stack is in use.
&H800700D0 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
&H800700D1 The signal being posted is not correct.
&H800700D2 The signal handler cannot be set.
&H800700D4 The segment is locked and cannot be reallocated.
&H800700D6 Too many dynamic link modules are attached to this program or dynamic link module.
&H800700D7 Can't nest calls to LoadModule.
&H800700E6 The pipe state is invalid.
&H800700E7 All pipe instances are busy.
&H800700E8 The pipe is being closed.
&H800700E9 No process is on the other end of the pipe.
&H800700EA More data is available.
&H800700F0 The session was cancelled.
&H800700FE The specified extended attribute name was invalid.
&H800700FF The extended attributes are inconsistent.
&H80070103 No more data is available.
&H8007010A The Copy API cannot be used.
&H8007010B The directory name is invalid.
&H80070113 The extended attributes did not fit in the buffer.
&H80070114 The extended attribute file on the mounted file system is corrupt.
&H80070115 The extended attribute table file is full.
&H80070116 The specified extended attribute handle is invalid.
&H8007011A The mounted file system does not support extended attributes.
&H80070120 Attempt to release mutex not owned by caller.
&H8007012A Too many posts were made to a semaphore.
&H8007012B Only part of a Read/WriteProcessMemory



Ko je trenutno na forumu
 

Ukupno su 687 korisnika na forumu :: 13 registrovanih, 2 sakrivenih i 672 gosta   ::   [ Administrator ] [ Supermoderator ] [ Moderator ] :: Detaljnije

Najviše korisnika na forumu ikad bilo je 3028 - dana 22 Nov 2019 07:47

Korisnici koji su trenutno na forumu:
Korisnici trenutno na forumu: babaroga, bojank, Boris90, Chainsaw, cikadeda, dane007, dragoljub11987, Kotarle, Nomenklatura, sabros, Snorks, spektorsky, vasa.93