Tvtime problem

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Haha,bas sam smotan...
Upravo je to to,hvala odradjeno.

Nego,ja sam bio zanet jednim drugim problemom,zato sam omanuo na prostom podesavanju,a evo o cemu se radi:

Dolazi do poremecaja zvuka,pocinje da susti nakon otprilike desetak minuta,pa posle se normalizuje neko vreme pa opet,i kao da ima eho,duplira se pa postaje nerazmuno. (Najcesce je to kod TvTime gde se manifestuje cesto)
Mozete li mi tu pomoci?

• 1Ovo se svidja korisniku: Nidja-San
  
  Registruj se da bi pohvalio/la poruku!

Premestio sam u posebnu temu. Mada može biti i do TV Time-a.

Da li se javlja i kad nije pokrenut TV Time? Ako da, koji program je pokrenut? Da li se problem javlja i kod pregleda Flash sadržaja na netu (YouTube)?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Napisano: 29 Dec 2010 13:30

Provericu.....

Dopuna: 29 Dec 2010 13:46

Kad gledam filmove nema problema u plejerima,a evo preslisavam YouTube/muziku i nema smetnji....

Dopuna: 29 Dec 2010 20:37

Izgleda da samo Tvtime se ponasa tako,povremeno sa zvucnim smetnjama,za sada,uostalom videcu kako ce se ponasati kada budem gledao filmove malo vise.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Ako je problem samo sa Tvtime-om onda ću premestiti u forum Linux aplikacije. Da li si probao neki drugi program za pregled TV kanala? Xawtv je vrlo rudimentaran ali može neki put da pomogne pri dijagnostici problema sa TV karticom.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Napisano: 29 Dec 2010 21:08

Nisam probao,ali poslusacu vas savet,hvala

Dopuna: 29 Dec 2010 21:29

Instalirao sam XawTv,ali neznam da pokrenem TV programe. Pokusao sam tako sto sam postavio PAL za pretrazivanje i pokretao redom,i nista se nedesava.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Uz xawtv dolazi skripta scantv. Otvori konsole i otkucaj:
scantv

ili ako se buni zbog nedostatka prava pristupa
sudo scantv

Izlaz će izlistati sve programe koji su pronađeni. Da li kod tebe nalazi bilo koji kanal?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Napisano: 29 Dec 2010 23:15

Evo skenira!

Dopuna: 30 Dec 2010 0:40

Ovo me izmrcvari
Satima skenira i nasao jedan kanal, i to bez tona 1RTS.
Brisem ja ovo

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Kako bre satima? Jesi li proverio da li je dobro utaknut kabl od antene? To ne bi trebalo da traje više od par minuta.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Napisano: 30 Dec 2010 11:21

Nije prihvatio predlozene komande u terminalu:

scantv/sudo scantv

Onda sam nasao ovo:

[Link mogu videti samo ulogovani korisnici]

Pa sam isao redom,i poceo je da skenira,ali u ovoj liniji :

scantv -a -C /dev/vbi0 -o ~/.xawtv

je skenirao sve,sto je trajalo veoma dugo.

Nakon svega samo sam Imao 1RTS i nisam imao ton.Pregledao sam podesavanja za zvuk,sve je ukljueno.

Dopuna: 30 Dec 2010 12:06

Evo,pokusacu ponovo:

linux-d8qy:/home/nikolam # xawtv
This is xawtv-3.95, running on Linux/x86_64 (2.6.34.7-0.5-desktop)
xinerama 0: 1680x1050+0+0
WARNING: No DGA direct video mode for this display.
WARNING: couldn't find framebuffer base address, try manual
         configuration ("v4l-conf -a <addr>")
v4l2: WARNING: framebuffer base address mismatch
v4l2: me=(nil) v4l=(nil)
linux-d8qy:/home/nikolam # xawtv -hwscan
This is xawtv-3.95, running on Linux/x86_64 (2.6.34.7-0.5-desktop)
looking for available devices
port 310-341
    type : Xvideo, image scaler
    name : NV17 Video Texture

/dev/video0: OK                         [ -device /dev/video0 ]
    type : v4l2
    name : V-Stream Studio TV Terminator
    flags: overlay capture tuner

linux-d8qy:/home/nikolam # xawtv -device /dev/video0
This is xawtv-3.95, running on Linux/x86_64 (2.6.34.7-0.5-desktop)
xinerama 0: 1680x1050+0+0
WARNING: No DGA direct video mode for this display.
WARNING: keeping fbuf pitch at: 6720, as no base addr was detected
WARNING: couldn't find framebuffer base address, try manual
         configuration ("v4l-conf -a <addr>")
v4l2: WARNING: framebuffer base address mismatch
v4l2: me=(nil) v4l=(nil)
linux-d8qy:/home/nikolam # scantv
If 'scantv' is not a typo you can use command-not-found to lookup the package that contains it, like this:
    cnf scantv
linux-d8qy:/home/nikolam # cnf scantv
                     
The program 'scantv' can be found in following packages:
  * v4l-tools [ path: /usr/bin/scantv, repository: zypp (openSUSE-11.3 11.3-1.82) ]
  * v4l-tools [ path: /usr/bin/scantv, repository: zypp (repo-oss) ]
                                                                                             
Try installing with:
    zypper install v4l-tools

linux-d8qy:/home/nikolam #

Dopuna: 30 Dec 2010 12:09

Nastavak:

inux-d8qy:/home/nikolam # cnf scantv
                     
The program 'scantv' can be found in following packages:
  * v4l-tools [ path: /usr/bin/scantv, repository: zypp (openSUSE-11.3 11.3-1.82) ]
  * v4l-tools [ path: /usr/bin/scantv, repository: zypp (repo-oss) ]
                                                                                             
Try installing with:
    zypper install v4l-tools

linux-d8qy:/home/nikolam # zypper install v4l-tools
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following NEW package is going to be installed:
  v4l-tools

1 new package to install.
Overall download size: 190.0 KiB. After the operation, additional 911.0 KiB will be used.
Continue? [y/n/?] (y): y
Retrieving package v4l-tools-3.95-214.2.x86_64 (1/1), 190.0 KiB (911.0 KiB unpacked)
Retrieving: v4l-tools-3.95-214.2.x86_64.rpm [done (151.2 KiB/s)]
Installing: v4l-tools-3.95-214.2 [done]
linux-d8qy:/home/nikolam #


Dopuna: 30 Dec 2010 12:11

i dalje:

linux-d8qy:/home/nikolam # scantv

please select your TV norm
   0: NTSC
   1: NTSC-M
   2: NTSC-M-JP
   3: NTSC-M-KR
   4: PAL
   5: PAL-BG
   6: PAL-H
   7: PAL-I
   8: PAL-DK
   9: PAL-M
  10: PAL-N
  11: PAL-Nc
  12: PAL-60
  13: SECAM
  14: SECAM-B
  15: SECAM-G
nr ? 5

please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia
nr ? 5
[global]
freqtab = europe-west

[defaults]
input = Television
norm = PAL-BG

vbi: open failed [/dev/vbi]
open /dev/vbi: No such file or directory
linux-d8qy:/home/nikolam #


Dopuna: 30 Dec 2010 12:13

Nastavljam:

linux-d8qy:/home/nikolam # scantv -a

please select your TV norm
   0: NTSC
   1: NTSC-M
   2: NTSC-M-JP
   3: NTSC-M-KR
   4: PAL
   5: PAL-BG
   6: PAL-H
   7: PAL-I
   8: PAL-DK
   9: PAL-M
  10: PAL-N
  11: PAL-Nc
  12: PAL-60
  13: SECAM
  14: SECAM-B
  15: SECAM-G
nr ? 5

please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia
nr ? 5
[global]
freqtab = europe-west

[defaults]
input = Television
norm = PAL-BG

vbi: open failed [/dev/vbi]
open /dev/vbi: No such file or directory
linux-d8qy:/home/nikolam #

Dopuna: 30 Dec 2010 12:20

I ovo:
linux-d8qy:/home/nikolam # scantv -C /dev/vbi0

please select your TV norm
   0: NTSC
   1: NTSC-M
   2: NTSC-M-JP
   3: NTSC-M-KR
   4: PAL
   5: PAL-BG
   6: PAL-H
   7: PAL-I
   8: PAL-DK
   9: PAL-M
  10: PAL-N
  11: PAL-Nc
  12: PAL-60
  13: SECAM
  14: SECAM-B
  15: SECAM-G
nr ? 5

please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia
nr ? 5
[global]
freqtab = europe-west

[defaults]
input = Television
norm = PAL-BG


scanning channel list europe-west...
E2   ( 48.25 MHz): no station
E3   ( 55.25 MHz): no station
E4   ( 62.25 MHz): no station
S01  ( 69.25 MHz): no station
S02  ( 76.25 MHz): no station
S03  ( 83.25 MHz): no station
E5   (175.25 MHz): no station
E6   (182.25 MHz): ???
[unknown (E6)]
channel = E6

E7   (189.25 MHz): no station
E8   (196.25 MHz): no station
E9   (203.25 MHz): no station
E10  (210.25 MHz): no station
E11  (217.25 MHz): no station
E12  (224.25 MHz): no station
SE1  (105.25 MHz): no station
SE2  (112.25 MHz): no station
SE3  (119.25 MHz): no station
SE4  (126.25 MHz): no station
SE5  (133.25 MHz): no station
SE6  (140.25 MHz): no station
SE7  (147.25 MHz): no station
SE8  (154.25 MHz): no station
SE9  (161.25 MHz): no station
SE10 (168.25 MHz): no station
SE11 (231.25 MHz): no station
SE12 (238.25 MHz): no station
SE13 (245.25 MHz): no station
SE14 (252.25 MHz): no station
SE15 (259.25 MHz): no station
SE16 (266.25 MHz): no station
SE17 (273.25 MHz): no station
SE18 (280.25 MHz): no station
SE19 (287.25 MHz): no station
SE20 (294.25 MHz): no station
S21  (303.25 MHz): no station
S22  (311.25 MHz): no station
S23  (319.25 MHz): no station
S24  (327.25 MHz): no station
S25  (335.25 MHz): no station
S26  (343.25 MHz): no station
S27  (351.25 MHz): no station
S28  (359.25 MHz): no station
S29  (367.25 MHz): no station
S30  (375.25 MHz): no station
S31  (383.25 MHz): no station
S32  (391.25 MHz): no station
S33  (399.25 MHz): no station
S34  (407.25 MHz): no station
S35  (415.25 MHz): no station
S36  (423.25 MHz): no station
S37  (431.25 MHz): no station
S38  (439.25 MHz): no station
S39  (447.25 MHz): no station
S40  (455.25 MHz): no station
S41  (463.25 MHz): no station
21   (471.25 MHz): no station
22   (479.25 MHz): ???
[unknown (22)]
channel = 22

23   (487.25 MHz): no station
24   (495.25 MHz): ???
[unknown (24)]
channel = 24

25   (503.25 MHz): no station
26   (511.25 MHz): no station
27   (519.25 MHz): no station
28   (527.25 MHz): ???
[unknown (28)]
channel = 28

29   (535.25 MHz): no station
30   (543.25 MHz): no station
31   (551.25 MHz): no station
32   (559.25 MHz): no station
33   (567.25 MHz): no station
34   (575.25 MHz): no station
35   (583.25 MHz): no station
36   (591.25 MHz): no station
37   (599.25 MHz): ???
[unknown (37)]
channel = 37

38   (607.25 MHz): no station
39   (615.25 MHz): no station
40   (623.25 MHz): no station
41   (631.25 MHz): no station
42   (639.25 MHz): no station
43   (647.25 MHz): ???
[unknown (43)]
channel = 43

44   (655.25 MHz): no station
45   (663.25 MHz): no station
46   (671.25 MHz): no station
47   (679.25 MHz): no station
48   (687.25 MHz): no station
49   (695.25 MHz): no station
50   (703.25 MHz): no station
51   (711.25 MHz): no station
52   (719.25 MHz): no station
53   (727.25 MHz): no station
54   (735.25 MHz): no station
55   (743.25 MHz): no station
56   (751.25 MHz): no station
57   (759.25 MHz): ???
[unknown (57)]
channel = 57

58   (767.25 MHz): ???
[unknown (58)]
channel = 58

59   (775.25 MHz): no station
60   (783.25 MHz): no station
61   (791.25 MHz): no station
62   (799.25 MHz): no station
63   (807.25 MHz): no station
64   (815.25 MHz): no station
65   (823.25 MHz): no station
66   (831.25 MHz): no station
67   (839.25 MHz): no station
68   (847.25 MHz): no station
69   (855.25 MHz): no station
linux-d8qy:/home/nikolam # scantv -o ~/.xawtv

please select your TV norm
   0: NTSC
   1: NTSC-M
   2: NTSC-M-JP
   3: NTSC-M-KR
   4: PAL
   5: PAL-BG
   6: PAL-H
   7: PAL-I
   8: PAL-DK
   9: PAL-M
  10: PAL-N
  11: PAL-Nc
  12: PAL-60
  13: SECAM
  14: SECAM-B
  15: SECAM-G
nr ? 5

please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia
nr ? 5
vbi: open failed [/dev/vbi]
open /dev/vbi: No such file or directory
linux-d8qy:/home/nikolam #

Dopuna: 30 Dec 2010 12:25

Pa sam pokrenuo Xawtv u terminalu i dobio ovo:



Dopuna: 30 Dec 2010 12:41

Zatvori osam sve,restartovao komp, i pokrenuo Xawtv iz Start menija i dobio isto,nema slike,nema zvuka.
Neznam sta je trebalo ovde drugacije odraditi?