Iskustva sa Intel i7 6700K

• 1Ovo se svidja korisniku: Aco
  
  Registruj se da bi pohvalio/la poruku!

Planiram u skorije vreme da pazarim intel i7 6700k, pa me zanimaju vaša iskustva, kako se pokazao, da li je istina to da može da se pcb ploča savije prilikom montiranja kulera na njega i da dođe do njenog pucanja?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

FIFI-DREX ::Planiram u skorije vreme da pazarim intel i7 6700k, pa me zanimaju vaša iskustva, kako se pokazao, da li je istina to da može da se pcb ploča savije prilikom montiranja kulera na njega i da dođe do njenog pucanja?

Lepo a za šta kupuješ takav procesor namena, nema se šta reći puno o tom procesoru, jedan od najbojih trenutno u deskop varijanti. Kakav kuler to planiraš staviti pa smatraš da pa da bi se ploča mogla saviti.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Namena je za Autocad electrical, Eplan, MatLab simulink, virtuelnu mašinu i veliki broj otvorenih programa.
Planiram da stavim Noctua NH U14S, koji ima sistem pričvršćivanja secufirm2 i za kojeg proizvođač tvrdi da ne pravi problem oko savijanja pcb ploče, ali savetuje da prilikom transporta se skida hladnjak ili postavlja kućište računara u horizontalni položaj. Evo njihovog odgovora na žaljenje ljudi zbog slabe konstrukcije pcb kod skylake-a:
Citat:Our SecuFirm2 mounting systems undergo comprehensive compatibility tests before being approved for new platforms. We have neither detected any problem with regard to the Intel LGA 1151 platform (“Skylake”) during these tests nor have we received any reports from our customers, sales partners and system integrators that would indicate any possible issue. Our SecuFirm2 mounting systems (with the exception of some compact L-type models) rely on coil springs to create the required contact pressure, which gives a certain flexibility both with regards to tolerances in stack up height and shocks or other forces. Compared to spring-less mounting systems, which exclusively rely on the bending of the mounting brackets in order to create contact pressure, this allows to reduce the mechanical stress on CPU, socket and motherboard and thus helps to prevent possible damage from excessive forces. However, as it is not possible to reliably calculate or control the forces that act upon a system during transport (e.g. in shipping), we generally recommend, due to safety reasons, to take off coolers with a total weight of more than 700g (incl. fan). - Noctua
Evo i članka Intel Skylake CPUs are bending under the pressure of some coolers zbog kojeg me navelo sve na razmišljanje. Mada u tom članku primenjen je električni zavrtač da se pritegne cooler.

• 1Ovo se svidja korisniku: psyho93
  
  Registruj se da bi pohvalio/la poruku!

FIFI-DREX ::Namena je za Autocad electrical, Eplan, MatLab simulink, virtuelnu mašinu i veliki broj otvorenih programa.
Planiram da stavim Noctua NH U14S, koji ima sistem pričvršćivanja secufirm2 i za kojeg proizvođač tvrdi da ne pravi problem oko savijanja pcb ploče, ali savetuje da prilikom transporta se skida hladnjak ili postavlja kućište računara u horizontalni položaj. Evo njihovog odgovora na žaljenje ljudi zbog slabe konstrukcije pcb kod skylake-a:
Citat:Our SecuFirm2 mounting systems undergo comprehensive compatibility tests before being approved for new platforms. We have neither detected any problem with regard to the Intel LGA 1151 platform (“Skylake”) during these tests nor have we received any reports from our customers, sales partners and system integrators that would indicate any possible issue. Our SecuFirm2 mounting systems (with the exception of some compact L-type models) rely on coil springs to create the required contact pressure, which gives a certain flexibility both with regards to tolerances in stack up height and shocks or other forces. Compared to spring-less mounting systems, which exclusively rely on the bending of the mounting brackets in order to create contact pressure, this allows to reduce the mechanical stress on CPU, socket and motherboard and thus helps to prevent possible damage from excessive forces. However, as it is not possible to reliably calculate or control the forces that act upon a system during transport (e.g. in shipping), we generally recommend, due to safety reasons, to take off coolers with a total weight of more than 700g (incl. fan). - Noctua
Evo i članka Intel Skylake CPUs are bending under the pressure of some coolers zbog kojeg me navelo sve na razmišljanje. Mada u tom članku primenjen je električni zavrtač da se pritegne cooler.

Ma jok to je se više priča provukla nego što je problem, odličan procesor za tu namenu odličan kuler to će biti idealna kombinacija tog procesora sa tim vazdušnim kluerom.