Problem sa zvukom na Slackware 12

1

Problem sa zvukom na Slackware 12

offline
  • Cigarette Smoking Man
  • Pridružio: 14 Feb 2005
  • Poruke: 9113
  • Gde živiš: Beograd

Problem je malo čudan. Kada upalim komp se se čuje najnormalnije. Posle izvesnog vremena se ni jedan zvuk ne čuje. Kada probam da pustim neku muziku iz Audacious ili neki film preko Kaffeine-a odmah se zakucaju. Znači bilo koja aplikacija koja ima veze sa zvukom pravi problem. Kada restartujem komp opet je sve normalno.
Nešto ovde nije normalno.. Smile



Registruj se da bi učestvovao u diskusiji. Registrovanim korisnicima se NE prikazuju reklame unutar poruka.
offline
  • Pridružio: 06 Sep 2005
  • Poruke: 74

probaj da rekonfigurises sa

alsaconf



offline
  • pixxel  Male
  • Legendarni građanin
  • Pridružio: 21 Jun 2005
  • Poruke: 9091
  • Gde živiš: Tu i tamo...

za pocetak, procackaj logove u /var/log (ima ih mali milion, ali neki mora reci da je doslo do neke greske...)
pa mozes da probas da u momentu kad vidis da se greska pojavila otkucas dmesg da vidis poslednje log unose (mozda u njima ima nesto), a moguce je da ti odredjeni program pravi problem (jesi li recimo pokusao da odmah upalis audacious i poteras muziku i vidis dokle ce???)

offline
  • Cigarette Smoking Man
  • Pridružio: 14 Feb 2005
  • Poruke: 9113
  • Gde živiš: Beograd

Za taj problem sam provalio preko Kopete-a. Odjednom mi više ne "svira" kada dobijem novu poruku. Probam bilo šta drugo što ima veze sa zvukom-pravi problem. Ista stvar mi se desila i preksinoć. Kada sam krenuo da restartujem komp trebalo mu je mnogo vremena pa sam na kraju morao na dugme. Nešto se žešće zakucao.

@Plaser
Probao sam sto puta..

@pixxel
Pogledaću logove, ali ne verujem da ću nešto naći u njima jer nisam baš toliko stručan. Iskreno ne znam ni šta da tražim.. Bebee Dol Embarassed

Dopuna: 29 Jan 2008 14:20

Evo, Kopete opet ne "svira" ali ostali zvukovi rade. Možda je neki prooblem sa njim..

offline
  • bocke  Male
  • Moderator foruma
  • Glavni moderator Linux foruma
  • Veliki Pingvin
  • Guru
  • Pridružio: 16 Dec 2005
  • Poruke: 12315
  • Gde živiš: Južni pol

Koja zvucna je u pitanju? Ako je integrisana, koja je matična u pitanju?

1. Skini ovu skriptu: https://www.mycity.rs/must-login.png
2. Raspakuj je u direktorijumu po izboru (home, Desktop, itd...) - desni klik -> extract here.
3. pokreni konsole i prebaci se u direktorijum gde si sacuvao skriptu. Napr:
cd $HOME
4. Zatim pokrenes skriptu:
./mc-diag.sh
ili
sh /mc-diag.sh
5. Dalje postupi po uputstvu iz skripte.

offline
  • Cigarette Smoking Man
  • Pridružio: 14 Feb 2005
  • Poruke: 9113
  • Gde živiš: Beograd

Da, integrisana je zvučna karta a u pitanju je Realtek AC`97.

Ali nisam uspeo ovo sa skriptom. Sad Napravio sam na desku folder skripta, raspakovao fajl u taj folder ali kaže sledeće:

bash-3.1$ sh /mc-diag.sh
sh: /mc-diag.sh: No such file or directory

Isti slučaj je i sa komandom #sh /mc-diag.sh

E sad, kada ga raspakujem fajl se zove: 19007_2066666882_mc-diag.sh
Pokušao sam i da ga rename-ujem pa sam skinuo ove brojeve. Tada mi sa prvom komandom kaže Access Denied, a sa drugom No such file or directory..

offline
  • pixxel  Male
  • Legendarni građanin
  • Pridružio: 21 Jun 2005
  • Poruke: 9091
  • Gde živiš: Tu i tamo...

trebao si da kucas sh Desktop/skripta/mc-diag.sh

offline
  • Cigarette Smoking Man
  • Pridružio: 14 Feb 2005
  • Poruke: 9113
  • Gde živiš: Beograd

Probao sam i evo šta kaže:

bash-3.1# sh Desktop/skripta/mc-diag.sh
sh: Desktop/skripta/mc-diag.sh: No such file or directory
bash-3.1#

Dopuna: 30 Jan 2008 1:07

Problem rešen, thx to purple.. Wink

Ispostavilo se da uopšte nije problem sa zvukom već sa podešavanjima pa je verujem dolazilo do nekog konflikta.

Uglavnom, Settings-Sound&Multimedia-System Notifications-Player Settings. Kod mene je bilo čekirano No audio output a trebalo je Use the KDE sound system. Wink

Ne znam kako je ranije radilo jer ništa nisam čačkao, ali bitno je da sada opet radi.

offline
  • bocke  Male
  • Moderator foruma
  • Glavni moderator Linux foruma
  • Veliki Pingvin
  • Guru
  • Pridružio: 16 Dec 2005
  • Poruke: 12315
  • Gde živiš: Južni pol

rapha ::bash-3.1$ sh /mc-diag.sh
sh: /mc-diag.sh: No such file or directory


sh ./mc-diag.sh

rapha ::sh Desktop/skripta/mc-diag.sh

sh ./Desktop/skripta/mc-diag.sh

Tj... Sta se desilo sa ".", ondosno "./"?

No vazno da si ti resio problem. Wink

offline
  • Cigarette Smoking Man
  • Pridružio: 14 Feb 2005
  • Poruke: 9113
  • Gde živiš: Beograd

@bocke

Nisam normalan, još razmišljam što neće.. Embarassed
U svakom slučaju, ispostavilo se da i nie bio problem sa zvukom nego sa podešavanjima. Ne znam kako se to desilo, ali mi je sound output bio na off a sasvim sigurno nisam ulazio tamo. Možda je zbog nekog update-a..

Dopuna: 04 Feb 2008 16:21

Nažalost, moram da obnovim ovu temu. Sad
Isti je problem ali ovoga puta na PCLOS-u. Mislio sam da je problem sa Slackom ali evo događa se i sada i ne znam više šta da radim, nervira me.
Znači, odjednom prestaju da se čuju svi zvukovi i svaki program koj ima veze sa zvukom se zakucava. Kada restartujem komp sve radi normalno i posle nekog vremena opet ništa.

Bocke mi je tražio output sledećih komandi:
ps -A
 
PID TTY          TIME CMD
    1 ?        00:00:00 init
    2 ?        00:00:00 migration/0
    3 ?        00:00:00 ksoftirqd/0
    4 ?        00:00:00 events/0
    5 ?        00:00:00 khelper
    6 ?        00:00:00 kthread
    9 ?        00:00:00 kblockd/0
   10 ?        00:00:00 kacpid
   89 ?        00:00:00 kseriod
  125 ?        00:00:00 pdflush
  126 ?        00:00:00 pdflush
  127 ?        00:00:00 kswapd0
  128 ?        00:00:00 aio/0
  266 ?        00:00:00 kpsmoused
  277 ?        00:00:00 kjournald
  374 ?        00:00:00 udevd
  503 ?        00:00:00 khubd
  687 ?        00:00:00 scsi_eh_0
  688 ?        00:00:00 usb-storage
 1092 ?        00:00:00 khpsbpkt
 1203 ?        00:00:00 kmirrord
 1353 ?        00:00:00 kjournald
 1732 ?        00:00:00 syslogd
 1823 ?        00:00:00 anacron
 1843 ?        00:00:00 atd
 1910 ?        00:00:00 klogd
 1983 ?        00:00:00 crond
 2016 ?        00:00:00 dbus-daemon
 2186 ?        00:00:00 ac97/0
 2248 ?        00:00:00 acpid
 2342 ?        00:00:00 hald
 2343 ?        00:00:00 hald-runner
 2683 ?        00:00:00 hald-addon-keyb
 2747 ?        00:00:00 hald-addon-cpuf
 2766 ?        00:00:00 hald-addon-acpi
 2867 ?        00:00:01 hald-addon-stor
 2872 ?        00:00:00 hald-addon-stor
 2925 ?        00:00:00 ifplugd
 3307 ?        00:00:00 avahi-daemon
 3308 ?        00:00:00 avahi-daemon
 3318 ?        00:00:00 portmap
 3469 ?        00:00:00 xinetd
 3508 ?        00:00:03 xfs
 3552 ?        00:00:00 cupsd
 3562 ?        00:00:00 kdm
 3607 tty7     00:05:29 X
 3614 tty1     00:00:00 mingetty
 3615 tty2     00:00:00 mingetty
 3616 tty3     00:00:00 mingetty
 3617 tty4     00:00:00 mingetty
 3620 tty5     00:00:00 mingetty
 3621 tty6     00:00:00 mingetty
 3652 ?        00:00:00 kdm
 3686 ?        00:00:00 startkde
 3765 ?        00:00:00 dbus-launch
 3766 ?        00:00:00 dbus-daemon
 3800 ?        00:00:00 s2u
 3834 ?        00:00:00 start_kdeinit
 3835 ?        00:00:00 kdeinit
 3838 ?        00:00:02 dcopserver
 3840 ?        00:00:00 klauncher
 3842 ?        00:00:10 kded
 3844 ?        00:00:00 gam_server
 3849 ?        00:00:00 kwrapper
 3851 ?        00:00:00 ksmserver
 3864 ?        00:01:20 compiz
 3865 ?        00:00:08 emerald
 3867 ?        00:00:08 kdesktop
 3869 ?        00:00:24 kicker
 3876 ?        00:00:01 kio_uiserver
 3879 ?        00:00:00 kxkb
 3883 ?        00:00:21 artsd
 3887 ?        00:00:00 kaccess
 3895 ?        00:00:00 kmix
 3898 ?        00:00:01 knotify
 3901 ?        00:00:00 klipper
 3903 ?        00:00:16 kopete
 3904 ?        00:00:00 xsettings-kde
 3953 ?        00:00:00 kdesud
 4363 ?        00:00:10 artsd
10174 ?        00:00:00 anacron
10301 ?        00:10:02 linuxdcpp
10308 ?        00:00:00 gnome-vfs-daemo
10310 ?        00:00:00 gconfd-2
10326 ?        00:00:13 kooldock
24356 ?        00:00:00 konsole
24357 pts/1    00:00:00 bash
24400 ?        00:00:00 kio_file
24404 pts/1    00:00:00 su
24407 pts/1    00:00:00 bash
24448 pts/1    00:00:00 ps


lsmod

Module                  Size  Used by
nvidia               4714932  32
fuse                   44404  1
8139too                26688  0
mii                     5760  1 8139too
af_packet              22120  0
snd_seq_dummy           3908  0
snd_seq_oss            32512  0
snd_seq_midi_event      7616  1 snd_seq_oss
snd_seq                52272  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          8268  3 snd_seq_dummy,snd_seq_oss,snd_seq
ipv6                  257888  12
snd_pcm_oss            43072  0
snd_mixer_oss          16608  1 snd_pcm_oss
video                  15108  0
thermal                13544  0
snd_intel8x0           33020  1
sbs                    14372  0
snd_ac97_codec         95268  1 snd_intel8x0
processor              28776  1 thermal
snd_ac97_bus            2400  1 snd_ac97_codec
i2c_ec                  5120  1 sbs
snd_pcm                76868  3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer              22884  2 snd_seq,snd_pcm
snd_page_alloc         10152  2 snd_intel8x0,snd_pcm
snd                    52708  11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
fan                     4804  0
soundcore               9824  1 snd
container               4448  0
button                  6640  0
battery                 9636  0
ac                      5188  0
ide_cd                 39712  0
cdrom                  36928  1 ide_cd
binfmt_misc            11912  1
nls_utf8                2208  3
nls_cp437               5952  3
vfat                   13280  3
fat                    53148  1 vfat
sg                     34840  0
sd_mod                 21216  0
loop                   16328  0
dm_mirror              21616  0
dm_mod                 56440  1 dm_mirror
cpufreq_ondemand        6956  0
cpufreq_conservative     7592  0
cpufreq_powersave       1920  0
p4_clockmod             5892  0
speedstep_lib           4804  1 p4_clockmod
freq_table              4960  1 p4_clockmod
intel_agp              23772  1
agpgart                32424  2 nvidia,intel_agp
martian_dev            19156  0
mmc_block               8136  0
sdhci                  18476  0
mmc_core               24448  2 mmc_block,sdhci
8250_pci               21120  0
ohci1394               35152  0
ieee1394              297848  1 ohci1394
bttv                  172308  0
video_buf              25220  1 bttv
firmware_class         10112  1 bttv
ir_common              28196  1 bttv
compat_ioctl32          1472  1 bttv
i2c_algo_bit            9288  1 bttv
btcx_risc               5096  1 bttv
tveeprom               15056  1 bttv
i2c_core               21376  5 nvidia,i2c_ec,bttv,i2c_algo_bit,tveeprom
videodev               24960  1 bttv
v4l1_compat            14148  1 videodev
v4l2_common            23328  2 bttv,videodev
floppy                 58308  0
yenta_socket           26700  0
rsrc_nonstatic         13792  1 yenta_socket
pcmcia_core            40244  2 yenta_socket,rsrc_nonstatic
capability              5000  0
commoncap               7360  1 capability
joydev                  9920  0
usb_storage            80704  0
scsi_mod              134600  3 sg,sd_mod,usb_storage
usblp                  13952  0
usbhid                 51712  0
ehci_hcd               32488  0
uhci_hcd               23784  0
usbcore               127364  6 usb_storage,usblp,usbhid,ehci_hcd,uhci_hcd
evdev                   9888  2
ext3                  134376  2
jbd                    57224  1 ext3


Evo i dmesg za svaki slučaj:

Linux version 2.6.18.8.tex5 (vaughan@localhost) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-4pclos2007)) #1 SMP Thu May 10 11:36:58 WST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f59c0
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 IntelR                                ) @ 0x000f7470
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7100
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 2403.130 MHz processor.
Built 1 zonelists.  Total pages: 262128
Kernel command line: BOOT_IMAGE=linux root=/dev/hda5 acpi=on resume=/dev/hda6 splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034768k/1048512k available (2078k kernel code, 13008k reserved, 662k data, 240k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4809.94 BogoMIPS (lpj=9619882)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 634k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Total of 1 processors activated (4809.94 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:02: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: dc000000-ddffffff
  PREFETCH window: d4000000-dbffffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: de000000-dfffffff
  PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1202096158.516:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd4000000, mapped to 0xf8880000, using 3750k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:ee20
vesafb: pmi: set display start = c00cee65, set palette = c00ceeea
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 275007 bytes,<6>...found (800x600, 274959 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: Hitachi HDT725025VLAT80, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 >
hdb: max request size: 512KiB
hdb: 488397168 sectors (250059 MB) w/7372KiB Cache, CHS=30401/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2 hdb3
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 240k freed
input: AT Translated Set 2 keyboard as /class/input/input0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000d800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: device not accepting address 3, error -71
usb 2-1: USB disconnect, address 2
usb 4-4: new high speed USB device using ehci_hcd and address 3
usb 4-4: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
usb 2-1: new low speed USB device using uhci_hcd and address 5
usb 2-1: configuration #1 chosen from 1 choice
SCSI subsystem initialized
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
Initializing USB Mass Storage driver...
input: 2-Axis,8-Button   as /class/input/input2
input: USB HID v1.10 Joystick [2-Axis,8-Button  ] on usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Capability LSM initialized
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux video capture interface: v2.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ieee1394: Initialized config rom entry `ip1394'
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
martian loaded - 20061202
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: AGP aperture is 64M @ 0xd0000000
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
EXT3 FS on hda5, internal journal
  Vendor: HP        Model: Photosmart C3180  Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb-storage: device scan complete
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Adding 4088500k swap on /dev/hda6.  Priority:-1 extents:1 across:4088500k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 275007 bytes,<6>...found (800x600, 274959 bytes, v3).
bootsplash: status on console 0 changed to on
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Transitioning device [FAN] to D3
ACPI: Transitioning device [FAN] to D3
ACPI: Fan [FAN] (off)
Using specific hotkey driver
Removing netfilter NETLINK layer.
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: Thermal Zone [THRM] (55 C)
intel8x0_measure_ac97_clock: measured 54577 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xf9226000, 00:50:8d:4a:4e:86, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8101'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fuse init (API version 7.7)
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 3177 bytes, v3).
bootsplash: status on console 5 changed to on
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9639  Mon Apr 16 20:20:06 PDT 2007
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
eth0: no IPv6 routers present
usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -75

Ko je trenutno na forumu
 

Ukupno su 486 korisnika na forumu :: 9 registrovanih, 2 sakrivenih i 475 gosta   ::   [ Administrator ] [ Supermoderator ] [ Moderator ] :: Detaljnije

Najviše korisnika na forumu ikad bilo je 3028 - dana 22 Nov 2019 07:47

Korisnici koji su trenutno na forumu:
Korisnici trenutno na forumu: hooraay, indja, ljubo70, misa1xx, nenad81, samsung, Skywhaler, Toni, yrraf