Logwatch

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

U logwatch mejlu su mi se pojavile informacije o Kernel module scsi Begin.

googlajuci, nisam nasao mnogo informacija, uglavnom su bile vezane za SUN.

Osim toga, pojavilo se i nesto pod Kernel Begin. O tome sam nasao nesto vise informacija. Na prvi pogled izgleda da nije toliko opasno, ali moracu i to dataljnije da proucim.
Interesuje me da li neko ima iskustva sa ovim. Bio bih vrlo zahvalan za sve ideje. U prilizenom se vidi jedan deo iz Logwatch-a.

Pozdrav

--------------------- Kernel Begin ------------------------


WARNING: Kernel Errors Present
[AFT0] errID 0x00000033.3d2f33b4 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.3dd2d0dc Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.3e090184 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.3e3cb830 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.3e701f2c Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.3ea4e2fc Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.3ed86488 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.3f0bb9f0 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.3f3f22e0 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.3f725a34 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.3fa3c4fc Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.3fd8427c Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.400c59a4 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.403e23bc Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.40714788 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.411b9d00 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.41b7d8b4 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.41e9ddc8 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.4252c860 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.4286cb38 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.42be4e8c Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.42f3b34c Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.43274fcc Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.435ba63c Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.438fda4c Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.43f88344 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.445f26a8 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.4495a638 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.44c950c8 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.45311d70 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.45981d04 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.464f82a0 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.470e1490 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.47d516a8 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.4886f508 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.48b81aac Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.5005df9c Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.5ef80430 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.5f54d908 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.5f8cd894 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.5fc791c8 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.5ffc3a40 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.60328a28 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.606c062c Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.60a2c1e4 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.60d9e264 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.6111bba8 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.6147aab0 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.61804eb0 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.61b4db6c Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.61ee638c Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.62222e24 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.62587ed4 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.628fcefc Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.62c7f9e4 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.6301f0f4 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.63386d64 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.636e15b8 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.63a3f32c Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.63db43b8 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.641032e4 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.6447ae68 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.647d601c Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.64b11470 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.64e5d00c Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.651dcae8 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.65513310 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.65c22138 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.65f82814 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.662e491c Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.6661fd70 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.669868b0 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.66ccaeb8 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.670692a4 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.673b7b2c Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.67778e78 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.67ac6634 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.67e26d10 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.68173aa4 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.684faf60 Data Bit 28 was in error and corrected ...: 4 Time(s)
[AFT0] errID 0x00000033.6886a358 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.68bc73e8 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.69291354 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.69630550 Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.699902cc Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.69d036d4 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.6a09c340 Data Bit 28 was in error and corrected ...: 2 Time(s)
[AFT0] errID 0x00000033.6a4301f0 Data Bit 28 was in error and corrected ...: 3 Time(s)
[AFT0] errID 0x00000033.6a7a3e2c Data Bit 28 was in error and corrected ...: 1 Time(s)
[AFT0] errID 0x00000033.8b479ac8 Data Bit 28 was in error and corrected ...: 3 Time(s)

---------------------- Kernel End -------------------------


--------------------- Kernel module scsi Begin ------------------------


**Unmatched Entries**
/pci@1c,600000/scsi@2 (glm0):
/pci@1c,600000/scsi@2 (glm0):
/pci@1c,600000/scsi@2,1 (glm1):
/pci@1c,600000/scsi@2,1 (glm1):
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2 (glm0):
/pci@1c,600000/scsi@2 (glm0):
/pci@1c,600000/scsi@2,1 (glm1):
/pci@1c,600000/scsi@2,1 (glm1):
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd12 at fp0: name w500000e01027b8e2,0, bus address d2
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd11 at fp0: name w500000e010b88ee2,0, bus address e2
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd13 at fp0: name w2200000087154440,0, bus address d9
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd8 at fp0: name w500000e010b8e0f2,0, bus address ef
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd14 at fp0: name w22000000871d21a0,0, bus address d3
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd9 at fp0: name w500000e010b95282,0, bus address e8
<SUN72G cyl 14087 alt 2 hd 24 sec 424> ssd10 at fp0: name w500000e010b8eb72,0, bus address e1
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd6 at fp0: name w500000e010b8bc62,0, bus address e0
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd15 at fp0: name w2200000087150929,0, bus address d6
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd16 at fp0: name w22000000871d6a04,0, bus address d5
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd24 at fp0: name w2200000087a0034b,0, bus address e4
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd17 at fp0: name w2200000087153b03,0, bus address d4
ssd12 at fp0: name w500000e01027b8e2,0, bus address d2
ssd11 at fp0: name w500000e010b88ee2,0, bus address e2
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd13 at fp0: name w2200000087154440,0, bus address d9
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd2 at fp2: name w500000e010b8e0f1,0, bus address ef
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd22 at fp2: name w21000000871d6a04,0, bus address d5
<SUN72G cyl 14087 alt 2 hd 24 sec 424> ssd0 at fp2: name w500000e010b8bc61,0, bus address e0
ssd17 at fp0: name w2200000087153b03,0, bus address d4
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd5 at fp2: name w500000e010b88ee1,0, bus address e2
<SUN72G cyl 14087 alt 2 hd 24 sec 424> ssd20 at fp2: name w21000000871d21a0,0, bus address d3
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
ssd4 at fp2: name w500000e010b8eb71,0, bus address e1
ssd22 at fp2: name w21000000871d6a04,0, bus address d5
ssd25 at fp2: name w2100000087a0034b,0, bus address e4
ssd23 at fp2: name w2100000087153b03,0, bus address d4 /pci@8,600000/SUNW,qlc@2/fp@0,0 (fcp2):

---------------------- Kernel module scsi End -------------------------

Dopuna: 29 Sep 2008 11:42

Zaboravio sam da napomenem:

OS: Centos version 5

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Bilo bi korisno da si postavio i konfiguraciju računara.
SATA? RAID? Koji nivo RAIDA? Ili je u pitanju SCSI?

Pogledaj da li ima neceg relevantnog u sistemskim logovima:
cat /var/log/syslog | grep -B 1 -A 1 -i aft0
cat /var/log/syslog | grep -B 1 -A 1 -i sun7g
cat /var/log/syslog | grep -B 1 -A 1 -i scsi

Ako su u pitanju SMART diskovi, proveri ih za greske:
smartctl  -d ata -A /dev/xx
Ukoliko na tvom sistemu ne postoji smartctl, pogledaj ovde:
[Link mogu videti samo ulogovani korisnici]

Ako koristis RAID, probaj sa:
cat /proc/mdstat

Vezano za ovu AFT0 gresku... Preporucio bih ti da restartujes racunar i pokrenes test memorije iz BIOSa. Ukoliko u tvom BIOSu ne postoji test memorije, probaj sa ovim:
[Link mogu videti samo ulogovani korisnici]

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Hvala bocke na odgovoru!

Izgleda (nisam stigao da proverim jer se pojavio jedan drugi problemcic u medjuvremenu) da je u pitanju HP Smart Array.

fdisk daje:

fdisk -l

Disk /dev/cciss/c0d0: 146.7 GB, 146745262080 bytes
255 heads, 63 sectors/track, 17840 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 13 104391 83 Linux
/dev/cciss/c0d0p2 14 17840 143195377+ 8e Linux LVM


nastavak sledi...

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Nisam imao iskustva sa HP Proliant serverima. Malo sam prelistao net i nasao zvanicnu razvojnu stranu drajvera za Smart Array, skinuo manual strane dijagnostickih alata koji su pomenuti na stranici i sazvakao sve to u nekoliko redova:

Proveri status fizickih diskova u "array":
cciss_vol_status -p
Za vise informacija pogledaj manual.

Proveri da li je pokrenut cpqarrayd. Ako jeste, iskljuci ga i pokreni sa "-d -f". Ovo ce izbacivati debug output na stdout. Mozda pokaze i neku korisnu poruku.
cpqarrayd -d -f

Ukoliko imas instaliran program arrayprobe, pokreni ga sa opcijama:
arrayprobe -r

To zajedno sa outputom smartctl iz gornjeg posta bi trebalo da ti da sasvim dovoljno outputa za dijagnostikovanje u cemu je i gde je nastao problem.

Ukoliko nemas instalirane ove alate, linkove mozes pronaci ovde:
[Link mogu videti samo ulogovani korisnici]

Ukoliko negde dijagnostikujes problem, znaces na koju stranu treba dalje gledati. Btw, koliko je diskova vezano u array?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

instalirao sam cciss_vol_status.


./cciss_vol_status -p /dev/cciss/c0d0
/dev/cciss/c0d0: (Smart Array E200i) RAID 5 Volume 0 status: OK.

3 diska su vezana u array.

nisam napomenuo da se ovo desava samo kad rebootujem server, sto je bitno.

koristi se syslog-ng. nisam ukapirao gde syslog-ng loguje. verovatno je logwatch podesen tako da uzima podatke iz vise fajlova, httpd. kernel, Kernel module scsi, itd pa onda sve to skupi i posalje kao mejl. to ja sad samo predpostavljam.

cpqarrayd i arrayprobe nisam uspeo da pokrenem. prilikop pokusaja da instaliram:

./configure

u oba slucaja dobijem:

checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for kernel sources... configure: error: Kernel sources not found

ne znam koliko je relevantno, ali

dmesg
Linux version 2.6.18-92.1.1.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Sat Jun 21 19:04:27 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfe58000 (usable)
BIOS-e820: 00000000bfe58000 - 00000000bfe60000 (ACPI data)
BIOS-e820: 00000000bfe60000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
2174MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f80
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 786008
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 556632 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v002 HP ) @ 0x000f4f00
ACPI: XSDT (v001 HP D21 0x00000002 Ò 0x0000162e) @ 0xbfe58300
ACPI: FADT (v003 HP D21 0x00000002 Ò 0x0000162e) @ 0xbfe58380
ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0xbfe58100
ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0xbfe58180
ACPI: HPET (v001 HP D21 0x00000002 Ò 0x0000162e) @ 0xbfe581c0
ACPI: SPMI (v005 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0xbfe58200
ACPI: MADT (v001 HP 00000083 0x00000002 0x00000000) @ 0xbfe58240
ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20030228-) @ 0x00000000
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Detected 2333.523 MHz processor.
Built 1 zonelists. Total pages: 786008
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c074b000 soft=c072b000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3110264k/3144032k available (2096k kernel code, 32524k reserved, 874k data, 228k init, 2226528k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4669.53 BogoMIPS (lpj=2334767)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0004e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c074c000 soft=c072c000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4666.81 BogoMIPS (lpj=2333408-)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0004e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0004e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06
Total of 2 processors activated (9336.35 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=33
checking if image is initramfs... it is
Freeing initrd memory: 2987k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=25
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:03.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB.EPPB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Device 0000:00:00.0 not found by BIOS
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x700-0x71f has been reserved
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:05:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: fde00000-fdefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:13:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:12:00.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: c4000000-c40fffff
PCI: Bridge: 0000:00:05.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: c4000000-c40fffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: fa000000-fbffffff
PREFETCH window: c4100000-c41fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: fa000000-fbffffff
PREFETCH window: c4100000-c41fffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-3fff
MEM window: f9e00000-f9ffffff
PREFETCH window: f0000000-f7ffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:04:00.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:05:01.0 to 64
PCI: Setting latency timer of device 0000:04:00.3 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:12:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1214493757.271:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F51CF1F017423C2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:04:00.0 to 64
Allocate Port Service[0000:04:00.0:pcie10]
PCI: Setting latency timer of device 0000:05:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:00.0:pcie20]
PCI: Setting latency timer of device 0000:05:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:01.0:pcie20]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x6
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x7
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI - using IRQ 7
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hdb: HL-DT-STDVD+-RW GSA-H21L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 393k
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf9df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
logips2pp: Detected unknown logitech mouse model 11
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 58, io base 0x00001040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 66, io base 0x00001060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 74
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 74, io base 0x00003800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
SCSI subsystem initialized
HP CISS Driver (v 3.6.20-RH1)
ACPI: PCI Interrupt 0000:13:08.0[A] -> GSI 19 (level, low) -> IRQ 66
cciss0: <0x3238> at PCI 0000:13:08.0 IRQ 82 using DAC
blocks= 286611840 block_size= 512
heads= 255, sectors= 32, cylinders= 35124

blocks= 286611840 block_size= 512
heads= 255, sectors= 32, cylinders= 35124

cciss/c0d0: p1 p2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [Link mogu videti samo ulogovani korisnici]
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /class/input/input2
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input3
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usb 6-2: new full speed USB device using uhci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1214493763.646:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input4
EDAC MC: Ver: 2.0.1 Jun 21 2008
EDAC MC0: Giving out device to i5000_edac.c I5000: DEV 0000:00:10.0
intel_rng: FWH not detected
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Floppy drive(s): fd0 is 1.44M
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
libata version 3.00 loaded.
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 169, node addr 001cc4c05c78
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
mtrr: type mismatch for f0000000,2000000 old: uncachable new: write-combining
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
microcode: CPU1 updated from revision 0xc9 to 0xcd, date = 09162007
microcode: CPU0 updated from revision 0xc9 to 0xcd, date = 09162007
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
bnx2: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
mtrr: type mismatch for f0000000,2000000 old: uncachable new: write-combining

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Ajmo ovako:
Citat: [AFT0] errID 0x00000033.3d2f33b4 Data Bit 28 was in error and corrected ...: 3 Time(s)

AFT0 je vezano za memoriju. Memorija na serveru ima ECC i javlja da nešto u tom tenutku nije bilo u redu. AFT0 su samo informacione poruke. One izveštavaju da je nađena ispravljiva greška koja je i ispravljena. S druge strane to može značiti i da je neki od memorijskih modula blizu toga da ode u večna lovišta. Ne poznajem arhitekturu HP Proliant servera, tako da je moguće da postoji i drugačiji način organizacije memorije kao što su memorijske ploče i sl.

Drugi deo ukazuje na problem sa RAID kontrolerom. Osnovna stvar koju možeš uraditi i bez softverske provere je provera da li je kabl u redu. Recimo, ako su u pitanju S-ATA diskovi Pokušaj da promeniš S-ATA kabl.

SUN72G ukazuje na greške na Seagate-ovim HDovima sa SUN-ovim firmwareom. Koji je tačno disk u pitanju ti ne bih znao reći. Sa ovakvom konfiguracijom nisam imao iskustva. Po izlazu bih posumnjao na disk br. 2.

 /pci@1c,600000/scsi@2 (glm0):
/pci@1c,600000/scsi@2 (glm0):
/pci@1c,600000/scsi@2,1 (glm1):
/pci@1c,600000/scsi@2,1 (glm1):

Mada se u ovim redovima ne nalazi nikakav konkretan izveštaj o grešci. Što ne znači i da ga nije bilo. Možda je LogWatch odsekao taj deo.

Proveri podešavanja LogWatcha i iz kog fajla izveštava o ovim greškama. Zatim ustanovi koji servis loguje te greške. Većina servisa ima i debugging ili verbose mode funkcionisanja. Pokreni servis na taj nacin i obrati paznju na greske.

Ali ono što je stvarno najpametnije je pozvati tehničku podršku prodavca servera i proveriti. Ako je server u nekom hosting centru, pozvati njihovu tehničku podršku ili im poslati email. Ukoliko prodavac ne nudi tehničku podršku ubuduće dobro obratite pažnju od koga kupujete serverski hardver.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Bocke, puno hvala!
Svaka cast.

u pitanju su 3 serial scsi diska.

mislim da garancija jos uvek vazi.
kupicu i rezervne memorije da se nadje.

Dopuna: 10 Okt 2008 8:58

malo pre sam dobio odgovor iz HP direktno, ne preko dilera. iz prilozenog (isto sto sam ovde ostavio) su zakjucili da je problem u vezi sa SW ane sa HW.
hmm... nista idemo dalje.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Rekli su da nisu nadležni? Ili si dobio i objašnjenje zašto tako misle?

Što se tiče softverskog dela... Proveri podešavanja Log Watch-a. Dokumentaciju za Log Watch ćeš naći na njihovoj zvaničnoj Internet prezentaciji: [Link mogu videti samo ulogovani korisnici] .

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

nikakvo objasnjenje, samo da su prosledili dalje i da su tehnicari iz prilozenog konstatovali da je SW. inace garancija jos vazi.