|
Instalirao sam lm-sensors. I ispratio korake za detekciju senzora... sudo sensors-detect na sva pitanja odgovarao sa Yes. Nakon toga sam restartovao racunar. Komanda sensor daje sledeci izlaz
Problem je u tome sto mi ne daje vise informacija(a ispratio sam korake iz tutorijala ) npr ovako
w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.13 V (min = +0.00 V, max = +1.74 V)
in1: +11.30 V (min = +0.90 V, max = +0.05 V) ALARM
AVCC: +3.28 V (min = +2.11 V, max = +2.40 V) ALARM
3VCC: +3.28 V (min = +2.05 V, max = +0.37 V) ALARM
in4: +1.41 V (min = +0.00 V, max = +1.57 V)
in5: +1.65 V (min = +0.02 V, max = +0.14 V) ALARM
in6: +4.45 V (min = +3.28 V, max = +1.64 V) ALARM
VSB: +3.28 V (min = +0.14 V, max = +3.07 V) ALARM
VBAT: +3.22 V (min = +2.06 V, max = +1.02 V) ALARM
Case Fan: 0 RPM (min = 2636 RPM, div = 128) ALARM
CPU Fan: 1117 RPM (min = 1591 RPM, div = 8) ALARM
Aux Fan: 0 RPM (min = 1171 RPM, div = 128) ALARM
fan5: 0 RPM (min = 659 RPM, div = 128) ALARM
Sys Temp: +31.0°C (high = +18.0°C, hyst = +96.0°C) sensor = thermistor
CPU Temp: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +1.163 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +43.0°C (high = +82.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +43.0°C (high = +82.0°C, crit = +100.0°C)
coretemp-isa-0002
Adapter: ISA adapter
Core 2: +40.0°C (high = +82.0°C, crit = +100.0°C)
coretemp-isa-0003
Adapter: ISA adapter
Core 3: +43.0°C (high = +82.0°C, crit = +100.0°C)
Da li zna neko kako da omogucim ostale informacije kao na ovom primeru? Makar fan speed ako nista drugo.  Koristim debian jessie 8.2
|
