Problem sa rezolucijom ekrana pod Ubuntuom

1

Problem sa rezolucijom ekrana pod Ubuntuom

offline
  • Pridružio: 11 Sep 2007
  • Poruke: 3271

Ma Ubuntu je nezamenjljiv
Malo pre mi je zavrsio update sistema
Ima OGROMANU bazu programa u Synapticu (ja sam moj podesio na glavni Ubuntu-oc server)

DA ne otvaram novu temu
Interesuje me samo jedna stvar
Imam GeForce MX440
Enable-ovao sam je u Restricted driver manager-u,skinuo i instalirao drajvere
Medjutim na maksimalnoj rezoluciji 1280*1024 ne mogu da dobijem refresh rate veci od 50MHz
Jel zna neko resenje,posto jos dva dana sedenja ispred takvog monitora (Samsung SyncMaster 920N) i ja cu oslepeti

Hvala svima unapred

Go LINUX Go



Registruj se da bi učestvovao u diskusiji. Registrovanim korisnicima se NE prikazuju reklame unutar poruka.
offline
  • bocke  Male
  • Moderator foruma
  • Glavni moderator Linux foruma
  • Veliki Pingvin
  • Guru
  • Pridružio: 16 Dec 2005
  • Poruke: 12365
  • Gde živiš: Južni pol

Okaci molim te /etc/X11/xorg.conf. Koji monitor koristis?



offline
  • dekao  Male
  • Moderator foruma
  • Dejan Trajković
  • Realist painter
  • Pridružio: 06 Apr 2006
  • Poruke: 3560
  • Gde živiš: Somewhere in time

@bocke
pa piše Samsung SyncMaster 920N.

@Tanatos

Pronađi u /etc/X11/xorg.conf Section Monitor i tu upiši refresh rate koji podržava tvoj monitor (to možeš proveriti na instalacionom disku koji si dobio uz njega). Npr. taj deo kod mene izgleda ovako:

Section "Monitor"
Identifier "1705 S1"
Option "DPMS"
HorizSync 31 - 80
VertRefresh 56 - 75
EndSection

ovo HorizSync i VertRefresh su te vrednosti. A editor pogrećeš sa:

sudo gedit /etc/X11/xorg.conf

@bocke
Jel tako profesore?

offline
  • pixxel  Male
  • Legendarni građanin
  • Pridružio: 21 Jun 2005
  • Poruke: 9091
  • Gde živiš: Tu i tamo...

Mogu i ja da odgovorim, jeste, tako je, samo naravno covek treba da nadje svoje vrednosti za horizsync i vertrefresh (progooglaj malo, i naci ces bez problema)

offline
  • bocke  Male
  • Moderator foruma
  • Glavni moderator Linux foruma
  • Veliki Pingvin
  • Guru
  • Pridružio: 16 Dec 2005
  • Poruke: 12365
  • Gde živiš: Južni pol

dekao ::@bocke
Jel tako profesore?


Tako, tako. Smile

pixxel ::Mogu i ja da odgovorim, jeste, tako je, samo naravno covek treba da nadje svoje vrednosti za horizsync i vertrefresh (progooglaj malo, i naci ces bez problema)

Ili probaj ovo (progooglao umesto tebe):

    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "VendorName"    "SAMSUNG"
    Option         "ModelName"    "SyncMaster 920N"

offline
  • Pridružio: 11 Sep 2007
  • Poruke: 3271

Otvorio sam terminal,pokrenuo xorg.conf,nasao sekciju Monitor,i sada treba samo da iskopiram ovo
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "VendorName" "SAMSUNG"
Option "ModelName" "SyncMaster 920N"

I da sacuvam

I trebam da restartujem sistem?

offline
  • bocke  Male
  • Moderator foruma
  • Glavni moderator Linux foruma
  • Veliki Pingvin
  • Guru
  • Pridružio: 16 Dec 2005
  • Poruke: 12365
  • Gde živiš: Južni pol

Najvaznije su ti opcije HorizSync i VertSync. Ako ne postoje u sekciji monitor dodaj. Ako postoje zameni novim vrednostima.

Inace, moras editor da pokrenes kao root. To mozes uraditi koristeci opciju "run" iz menija ili otvaranjem gnome terminala i kucanjem:

sudo gedit /etc/X11/xorg.conf

Zatim restartuj graficko okruzenje pritiskom na Ctrl+Alt+Backspace i to je to.

offline
  • Pridružio: 11 Sep 2007
  • Poruke: 3271

Pooooomooooc BRZO
Nesto sam lose ispisao u xorg.conf i sada nece da mi pokrene linux
Izacuje neki Fatal Error
Pomagajte sto pre,gusi me ovaj Windows

offline
  • bocke  Male
  • Moderator foruma
  • Glavni moderator Linux foruma
  • Veliki Pingvin
  • Guru
  • Pridružio: 16 Dec 2005
  • Poruke: 12365
  • Gde živiš: Južni pol

Ovako... Instaliraj Explore2fs http://uranus.it.swin.edu.au/~jn/linux/explore2fs.htm i sa njime iskopiraj /etc/X11/xorg.conf u Windows, a zatim ga okaci uz odgovor na ovu temu.

offline
  • Pridružio: 11 Sep 2007
  • Poruke: 3271

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV17 [GeForce4 MX 440-SE]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "VendorName" "SAMSUNG"
Option "ModelName" "SyncMaster 920N"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV17 [GeForce4 MX 440-SE]"
Monitor "SyncMaster"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

Ko je trenutno na forumu
 

Ukupno su 645 korisnika na forumu :: 26 registrovanih, 5 sakrivenih i 614 gosta   ::   [ Administrator ] [ Supermoderator ] [ Moderator ] :: Detaljnije

Najviše korisnika na forumu ikad bilo je 3466 - dana 01 Jun 2021 17:07

Korisnici koji su trenutno na forumu:
Korisnici trenutno na forumu: 357magnum, Acronis, Alibaba1981, Ben Roj, BORUTUS, darionis, dekan.m, Dorcolac, draganl, Drug pukovnik, goran.vvv, Komentator, laze2, mrvica78, novator, operniki, promajauglavi, raketaš, Shinobi, skvara, solic, trutcina, voja64, W123, Yonesky, Zimbabwe